College Details
College Detail

Central Institute of Tool Design, CITD, Hyderabad

.
A-1 to A-8, A.P.I.E., Balanagar
Hyderabad
Andhra Pradesh
Phone-No: 23772747 2748 2749 6178
Fax: 91-40-23772658
Email: citdcadcam@citdindia.org
Website:
Establish:1968
AdmissionNews Notification
AdmissionNews Notification
About College:

Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:


·         Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.


·         Design & Manufacture of dies, jigs, fixtures and guages, etc.


·         Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.


·         Recommending measures to standardise components for dies, jigs and other tools.


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Semester 60 23 Nov 2016 n

Course Name:

Post Graduation in Tool Die Mould Design PGTD

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduation in Tool, Die & Mould Design (PGTD)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Post Graduation in Tool Die Mould Design PGTD in Central Institute of Tool Design, CITD, Hyderabad

Qualification: BE, BTech (Mech, Prodn) or equivalent.

Age limit: 45 years

How To Apply:
Application Procedure for Post Graduation in Tool Die Mould Design PGTD in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 4 Years (8 semesters) . 23 Nov 2016 n

Course Name:

Diploma Course in Tool Die and Mould Making DTDM

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma Course in Tool, Die and Mould Making (DTDM)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma Course in Tool Die and Mould Making DTDM in Central Institute of Tool Design, CITD, Hyderabad

Qualification: SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 45% marks for SC/ST category candidates.

Age: 19 years (not born before 01.04.1996).

Course Fee: Rs. 18000/- per semesters. (Rs. 36000/- per year)

How To Apply:
Application Procedure for Diploma Course in Tool Die and Mould Making DTDM in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 600/- for general and Rs. 300/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 3 semester 40 23 Nov 2016 n

Course Name:

Post Graduate Diploma in Mechatronics PGDM

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in Mechatronics (PGDM) For B.E/B. Tech [Course Contents: Applied Industrial Pneumatics, Applied Industrial Hydraulics, Mechanical Engineering: (Materials for Tooling, Design Practice, Cutting Tools, Metrology and Qualify Assurance. Die Casting Dies. Plastic Moulding Tools, Press Tools, Jigs & Fixtures) Electrical Engineering, Applied Electronic Control for Automation. Micro Processors. Micro Controllers and PLC's, Sensor Technology. Mechatronics Technology, Neural Network and Fuzzy Logic]
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Post Graduate Diploma in Mechatronics PGDM in Central Institute of Tool Design, CITD, Hyderabad

BE/ BTech in Mechanical / Electrical / Electronics / Instrumentation / Mechatronics / Automobile or Equivalent

Mode of Selection: First come first served basis.

How To Apply:
Application Procedure for Post Graduate Diploma in Mechatronics PGDM in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 2 Semester 50 seats (27 self sponsored + 23 industry sponsored) 30 Jul 2016 n

Course Name:

Post Diploma in Tool Design PDTD

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Diploma in Tool Design (PDTD)
Parttime:
n
Fee:
Self Sponsored - Rs, 20,000/- per semester. Industry sponsored - Rs. 22,000/- per semester
Eligibility:
Eligibility and Selection Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad

Qualification: Diploma in Mechanical Engineering or equivalent (Recognized by State Board)

Age: 27 Years 

Course Fee: Rs. 13,000/- per semester. Candidates under all categories will be selected through counseling

How To Apply:
Application Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Last date for Submission form: 13th August 2016

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Semester 40 30 Jul 2016 n

Course Name:

P G Diploma in Embedded Systems

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in Embedded Systems [Offered by: - Electronics Corporation of India Limited]
Parttime:
y
Fee:
.
Eligibility:
Eligibility and Selection Procedure for P G Diploma in Embedded Systems in Central Institute of Tool Design, CITD, Hyderabad

Degree in Engineering CSE /ECE / EEE and EIE / MSc (Electronics) or equivalent.  

Selection Procedure:   
Admission will be based on a National level Common Admission Test to evaluate applicant's aptitude and Technical knowledge. The Test will be of 2 hrs duration comprising of objective type questions. The criterion for selection will be based on the applicant's performance in the test.

How To Apply:
Application Procedure for P G Diploma in Embedded Systems in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Last date for Submission form: 13th August 2016

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Semester 40 30 Jul 2016 n

Course Name:

P G Diploma in VLSI

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in VLSI [Offered by: - Electronics Corporation of India Limited]
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for P G Diploma in VLSI in Central Institute of Tool Design, CITD, Hyderabad

Degree in Engineering CSE /ECE / EEE and EIE / MSc (Electronics) or equivalent.  

Selection Procedure:   
Admission will be based on a National level Common Admission Test to evaluate applicant's aptitude and Technical knowledge. The Test will be of 2 hrs duration comprising of objective type questions. The criterion for selection will be based on the applicant's performance in the test.

How To Apply:
Application Procedure for P G Diploma in VLSI in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Last date for Submission form: 13th August 2016

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 3 Years . 16 May 2015 n

Course Name:

Diploma Course in Production Engineering DPE

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma Course in Production Engineering (DPE)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma Course in Production Engineering DPE in Central Institute of Tool Design, CITD, Hyderabad

Qualification: SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 45% marks for SC/ST category candidates.

Age: 19 years (not born before 01.04.1996).

Course Fee: Rs. 18000/- per semesters. (Rs. 36000/- per year)

How To Apply:
Application Procedure for Diploma Course in Production Engineering DPE in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 600/- for general and Rs. 300/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Entrance Test: 14th June, 2015 

Last date for Submission form: 30th May, 2015

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 2 Years . 26 Aug 2014 n

Course Name:

Master of Technology MTech - Robotics Automation

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Technology (MTech) - Robotics & Automation in collaboration with JNTUH, Hyderabad
Parttime:
n
Fee:
'
Eligibility:
Eligibility and Selection Procedure for Master of Technology MTech - Robotics Automation in Central Institute of Tool Design, CITD, Hyderabad

Qualification: B.E /B.Tech (Electronics and Communication/Mechanical Engineering/ Electrical and Electronics/ Electronics and Instrumentation/Aeronautical/Automobile Engg (OR) Equivalent) with 55% marks.

How To Apply:
Application Procedure for Master of Technology MTech - Robotics Automation in Central Institute of Tool Design, CITD, Hyderabad

Application form and prospectus can be obtained from Training Department, MSME-Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad-500037, on any working day between 09.30 am & 05.00 pm (Weekly holiday on Sunday) by paying application cost prescribed by cash or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

Candidates who wish to consider their application under sponsored category should submit the Xerox copies of sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the CITD entrance examination subject to fulfilling the other criteria applicable to the category Reservation for SC/ST/PWD quota exists as per Govt. of India norms

For further details, please contact: Training Department Tel Phone No. 23771959, 23776156, Fax No. 040-23772658, Visit us at: www.citdindia.org, Email: citdplacements@citdindia.org

Closing Date:
NA
Comments:

Last date for Submission form: 09th September, 2014

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot 


Category Duration Seats Opening Date Hostel
Engineering 2 Years . 26 Aug 2014 n

Course Name:

Master of Technology MTech - Mechatronics

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Technology (MTech) - Mechatronics in collaboration with JNTUH, Hyderabad
Parttime:
n
Fee:
'
Eligibility:
Eligibility and Selection Procedure for Master of Technology MTech - Mechatronics in Central Institute of Tool Design, CITD, Hyderabad

Qualification: B.E/B.Tech (Mechanical Engineering/Production Engineering/ Automobile Engineering / Electrical and Electronics/Electronics and Communication/Electronics and Instrumentation /Mechatronics OR Equivalent) with 55% marks.

How To Apply:
Application Procedure for Master of Technology MTech - Mechatronics in Central Institute of Tool Design, CITD, Hyderabad

Application form and prospectus can be obtained from Training Department, MSME-Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad-500037, on any working day between 09.30 am & 05.00 pm (Weekly holiday on Sunday) by paying application cost prescribed by cash or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

Candidates who wish to consider their application under sponsored category should submit the Xerox copies of sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the CITD entrance examination subject to fulfilling the other criteria applicable to the category Reservation for SC/ST/PWD quota exists as per Govt. of India norms

For further details, please contact: Training Department Tel Phone No. 23771959, 23776156, Fax No. 040-23772658, Visit us at: www.citdindia.org, Email: citdplacements@citdindia.org

Closing Date:
NA
Comments:

Last date for Submission form: 09th September, 2014

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 1 ½ Year . 26 Aug 2014 n

Course Name:

Post Diploma Course in Engineering Technology PDCET

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Diploma Course in Engineering & Technology (PDCET)
Parttime:
n
Fee:
'
Eligibility:
Eligibility and Selection Procedure for Post Diploma Course in Engineering Technology PDCET in Central Institute of Tool Design, CITD, Hyderabad

Qualification: Diploma in Mechanical Engineering or equivalent (Recognized by State Board)

Age: 27 Years

Course Fee: Rs. 13,000/- per semester. Candidates under all categories will be selected through counseling

How To Apply:
Application Procedure for Post Diploma Course in Engineering Technology PDCET in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 600/- for general and Rs. 300/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog  ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 2 Years . 07 Aug 2014 n

Course Name:

Master of Engineering Mechanical - CAD/CAM - (MECC)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Engineering Mechanical - CAD/CAM - (MECC)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Master of Engineering Mechanical - CAD/CAM - (MECC) in Central Institute of Tool Design, CITD, Hyderabad

B.E / B.Tech (Mech/Production/Mechatronics) with 55% marks

How To Apply:
Application Procedure for Master of Engineering Mechanical - CAD/CAM - (MECC) in Central Institute of Tool Design, CITD, Hyderabad

Application form and prospectus can be obtained from Training Department, MSME Tool Room / Central / Institute of Tool Design, Bala Nagar, Hyderabad-500037, on any working day between 09.30 a.m. and 05.00 p.m. by paying application cost prescribed by Bank Challan or a crossed demand draft in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Bala Nagar Branch, Hyderabad-500037


Application form can also be downloaded from www.citindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of demand draft drawn in favor of Principal Director, CITD Hyderabad, (C), candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application


No age limit for sponsored category candidates


The candidates under sponsored category will allot seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category


Reservation for SC/ST/PWD quota exists as per Govt. of India Norms

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 3 Years . 09 Nov 2013 n

Course Name:

Diploma Course in Electronics Communication Engineering DECE

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma Course in Electronics & Communication Engineering (DECE)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma Course in Electronics Communication Engineering DECE in Central Institute of Tool Design, CITD, Hyderabad

Qualification: SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 45% marks for SC/ST category candidates.

Age: 15 to 19 years.

Course Fee: Rs. 13,500/- per semesters. (Rs. 27,000/- per year)

How To Apply:
Application Procedure for Diploma Course in Electronics Communication Engineering DECE in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 600/- for general and Rs. 300/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from our website. www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog  ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Years NA n

Course Name:

Diploma Course in Automation & Robotics (DAR)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma Course in Automation & Robotics (DAR)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Diploma Course in Automation & Robotics (DAR) in Central Institute of Tool Design, CITD, Hyderabad

Qualification: SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 45% marks for SC/ST category candidates.

Age: 15 to 19 years (not born before 31.08.1991).

Course Fee: Rs. 13,500/- per semesters. (Rs. 27,000/- per year)

How To Apply:
Application Procedure for Diploma Course in Automation & Robotics (DAR) in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 600/- for general and Rs. 300/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from our website. www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
NA
Comments:

Commencement of issue of application forms: 28.02.2011

Last date for submission of filled-in applications (upto 5:00 PM at CITD): 16.04.2011

Last date for submission of filled-in applications with late fee of Rs. Rs.500/-: 20.04.2011

Date of Examination: 08.05.2011 (Sunday) at Hyderabad

 

To know more information about CITD Hyderabad Admission please visit www.citdindia.org

Please click the following link for other valuable news available on our Blog: - India Admission Alert Blog  ~~!!~~ Career Counseling Blog ~~!!~~ Admission News Blog ~~!!~~ My Admission News Blog


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 6 Months NA n

Course Name:

Master Certificate in CAD/CAM (M CAD / CAM)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master Certificate in CAD/CAM (M CAD / CAM)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Master Certificate in CAD/CAM (M CAD / CAM) in Central Institute of Tool Design, CITD, Hyderabad

Degree/Diploma in Mechanical Engineering or Equivalent.

Course Fee: Rs. 40,000/-'for SSI & Individuals, Rs. 53,500/- for Govt. Org. & Major Industries. Fee can be paid in 3 installments.

How To Apply:
Application Procedure for Master Certificate in CAD/CAM (M CAD / CAM) in Central Institute of Tool Design, CITD, Hyderabad

Information for the above courses is also available at Vijayawada Sub centre and Extension centre Chennai

1.      Address: 54-2-9, Phase III, Autonagar, .Vijayawada - 520 007, Ph. No. 0866-2540560.

2.      Address: MSME-Dl, Annexe Building, 65/1, G.S.T.Road, Guindy, Chennai-600032. Phone.044-22500366.

Please Address

MSME-TOOL ROOM, HYDERABAD CENTRAL INSTITUTE OF TOOL DESIGN

(Ministry of MSME - A Govt, of India Society)

Balanugar Hyderabad 500037

Phone no. 23772749, 23776178, 23772747-Extn.213, Fax: 23772658

Mobile: - +91 9849443056, +91 9440963987

E-mail citdcadcam@citdindia.org Website, www.citdindia.orq

Closing Date:
NA
Comments:

To know more information about CITD Hyderabad Admission please visit www.citdindia.org

Please click the following link for other valuable news available on our Blog: - India Admission Alert Blog  ~~!!~~ Career Counseling Blog ~~!!~~ Admission News Blog ~~!!~~ My Admission News Blog

 


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 6 Months NA n

Course Name:

Master Certificate in Computer Aided Tool Engineering (MCTE)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master Certificate in Computer Aided Tool Engineering (MCTE)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Master Certificate in Computer Aided Tool Engineering (MCTE) in Central Institute of Tool Design, CITD, Hyderabad

Degree/Diploma in Mechanical Engineering or Equivalent.

Course Fee: Rs. 50,000/- for SSI & Individuals, Rs. 66,500/- for Govt. Org. & Major Industries. Fee can be paid in 3 installments.

How To Apply:
Application Procedure for Master Certificate in Computer Aided Tool Engineering (MCTE) in Central Institute of Tool Design, CITD, Hyderabad

Information for the above courses is also available at Vijayawada Sub centre and Extension centre Chennai

1.      Address: 54-2-9, Phase III, Autonagar, .Vijayawada - 520 007, Ph. No. 0866-2540560.

2.      Address: MSME-Dl, Annexe Building, 65/1, G.S.T.Road, Guindy, Chennai-600032. Phone.044-22500366.

Contact Address

MSME-TOOL ROOM, HYDERABAD CENTRAL INSTITUTE OF TOOL DESIGN

(Ministry of MSME - A Govt, of India Society)

Balanugar Hyderabad 500037

Phone no. 23772749, 23776178, 23772747-Extn.213, Fax: 23772658

Mobile: - +91 9849443056, +91 9440963987

E-mail citdcadcam@citdindia.org Website, www.citdindia.orq

Closing Date:
NA
Comments:

To know more information about CITD Hyderabad Admission please visit www.citdindia.org

Please click the following link for other valuable news available on our Blog: - India Admission Alert Blog  ~~!!~~ Career Counseling Blog ~~!!~~ Admission News Blog ~~!!~~ My Admission News Blog


Category Duration Seats Opening Date Hostel
Fashion Technology 1 Years 50 NA n

Course Name:

Master Certificate in Tool Design (MCTD Evening)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master Certificate in Tool Design (MCTD Evening)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Master Certificate in Tool Design (MCTD Evening) in Central Institute of Tool Design, CITD, Hyderabad

A pass in Degree/Diploma in Mechanical Engg. Or its equivalent.

Course Fee: Rs.15, 000/- (Payable at the time of admission)

How To Apply:
Application Procedure for Master Certificate in Tool Design (MCTD Evening) in Central Institute of Tool Design, CITD, Hyderabad

(a) Application form and prospectus can be obtained form training department, Central Institute of Tool Design, Hyderabad-37. on any working day between 9.30am to 5pm. on payment Rs. 300/- only (for SC/ST candidates Rs.150/-for PWD fully exempted) by Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised Bank.

(b) Application form can also be downloaded form our website www.citdindia.org and filled in application form can be sent to the Director(Trg.), CITD, Balanagar Hyderabad-37 along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised

Bank.

 

à      Click here to download the application form

Closing Date:
NA
Comments:

Last date for submission of applications: 15th December 2009 

To know more Information about this course click here


Category Duration Seats Opening Date Hostel
Engineering 2 Years NA n

Course Name:

Diploma in Tool Engineering (DTE Evening)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma in Tool Engineering (DTE Evening)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Diploma in Tool Engineering (DTE Evening) in Central Institute of Tool Design, CITD, Hyderabad

A pass in two years ITI Course with fitter/Machinist/Tool & Die Maker/Turner/Mechanical Draughtsman trade or a pass in Two years intermediate with MPC group & with minimum 3 years full time practical experience in Mechanical Engg. Industry.

Course Fee: Rs.12, 600/- per year Self-Sponsored & Rs.19, 000/- per year Industry sponsored the fee includes charges for AutoCAD training.

No. of seats: 50 seats (Self Sponsored) & 10 seats (Industry sponsored)

How To Apply:
Application Procedure for Diploma in Tool Engineering (DTE Evening) in Central Institute of Tool Design, CITD, Hyderabad

(a) Application form and prospectus can be obtained form training department, Central Institute of Tool Design, Hyderabad-37. on any working day between 9.30am to 5pm. on payment Rs. 300/- only (for SC/ST candidates Rs.150/-for PWD fully exempted) by Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised Bank.

(b) Application form can also be downloaded form our website www.citdindia.org and filled in application form can be sent to the Director(Trg.), CITD, Balanagar Hyderabad-37 along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised

Bank.

 

à      Click here to download the application form

Closing Date:
NA
Comments:

Last date for submission of applications: 15th December 2009 

To know more Information about this course click here


Category Duration Seats Opening Date Hostel
Information Tech (IT) 1 Year 40 NA n

Course Name:

PG Diploma in CAD/CAM for Tool Engineering (PGDCTE)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in CAD/CAM for Tool Engineering (PGDCTE)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for PG Diploma in CAD/CAM for Tool Engineering (PGDCTE) in Central Institute of Tool Design, CITD, Hyderabad

B.E (Mech.)/B.E (Prod.) or recognized equivalent qualification

 

Mode of Selection: Selection of candidates through Entrance Test: Candidates will be selected through entrance test for PGDCTE. Selection is purely based on merit in the written test conducted by CITD, Hyderabad.

 

Note:

1.      Candidates appearing for final year Degree Examination can also apply provided they secure a final pass in the qualifying exam at the time of the admission and they should produce the proof of passing the examination well before the finalization of admissions.

2.      Reservation for S.C/S.T category is considered as per Govt. of India rules.

3.      The Institute is not responsible for any postal delay.

4.      The seats advertised are provisional and the Institute reserves the right to increase or decrease the no. of seats.

5.      The rules made by the Institute regarding selection and closure of the admissions shall be final and the Institute reserve the right to alter, vary, change and / or modify the rules governing the admissions. Candidates are advised to refer the prospectus for further details.

 

Date of Entrance Test and Centre: 31-08-2008 (Sunday) at CITD, Hyderabad.

 

How To Apply:
Application Procedure for PG Diploma in CAD/CAM for Tool Engineering (PGDCTE) in Central Institute of Tool Design, CITD, Hyderabad

Prescribed application form and prospectus (containing rules and syllabus for Entrance Examination) can be had from CAD/CAM Department, Central Institute of Tool Design, Hyderabad – 500 037, by paying cash or a crossed Demand Draft of Rs. 300/- (S.C/S.T candidates Rs. 100/- and free of cost for PH Candidates) drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, Preferably State Bank of Hyderabad, Balanagar branch, Hyderabad – 37. The S.C/S.T Category candidates need to enclose a copy of Cast Certificate attested by Gazetted officer.


Applications can also be down loaded from our website www.citdindia.org and the filled in application forms can be sent to the Director, CITD (CAD/CAM), Central Institute of Tool Design, Hyderabad – 500 037 along with Demand Draft as mentioned above.

 

F       Application Form !!!!!   Prospectus

 

Closing Date:
NA
Comments:

Last Date for submission of application forms                               :  25-08-2008

Last Date for submission of application forms with late fee of Rs. 200/-:  28-08-2008

Date of Entrance Exam                                                               :  31-08-2008

Date of Counseling                                                                     :  12-09-2008

Date of Commencement of Course                                              :  15-09-2008

 

To know more details about this course click here

 


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Years (6 semesters) 30 NA n

Course Name:

Advanced Machinist Course (AMC)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Advanced Machinist Course (AMC)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Advanced Machinist Course (AMC) in Central Institute of Tool Design, CITD, Hyderabad

SSC (10th Class) or equivalent examination appeared but failed with Maths and Science as subjects.

 

Mode of selection: - Selection on the basis of marks obtained in Maths and Science subjects

In the qualifying examination that is 10th class failed.

 

Age: 15 – 24 years (not born before 31.8.1984).

How To Apply:
Application Procedure for Advanced Machinist Course (AMC) in Central Institute of Tool Design, CITD, Hyderabad

1.      Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

2.      Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

3.      Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

 

Note:

±       Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.

 

±       Reservation for SC/ST/PWD category exists in self sponsored category.

 

±       Age relaxation upto 5 years for SC/ST candidates.

 

±       The Institute is not responsible for any postal delay.

 

±       The seats advertised are provisional and the Institute reserves the right to increase or

Decrease the number of seats.

 

±       The rules made by the Institute regarding selection and closure of the admissions shall be

Final and the Institute reserves the right to alter, vary, change and / or modify the rules

governing the admissions.

 

±       Candidates are advised to refer the prospectus for further details.

 

To more Information Click here

 

Closing Date:
NA
Comments:

Last date for submission of filled–in applications (upto 5.00 pm at CITD): 23.06.08

Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08  

 

Course Fee: - Rs.6, 000/- per semester

 

            To more Information about this course Click here


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 2 Years (4 semesters) 30 NA n

Course Name:

Advanced Tool Makers Course (ATM)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Advanced Tool Makers Course (ATM)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Advanced Tool Makers Course (ATM) in Central Institute of Tool Design, CITD, Hyderabad

SSC/Matric with ITI in any one of the trades-Tool and Die Maker/Fitter/Machinist/Turner

 

Mode of Selection:

±       Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course.

 

±       Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category.

 

±       For ATM course, the candidates will be selected based on merit in the qualifying Examination i.e. X class & ITI with weight age in the ratio of 50:50 respectively For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed) Tentative Date Of Examination: 06.07.08 (Sunday) at Hyderabad.

 

Age: 25 years (not born before 31.08.1983)

How To Apply:
Application Procedure for Advanced Tool Makers Course (ATM) in Central Institute of Tool Design, CITD, Hyderabad

1.      Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

2.      Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

3.      Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

 

Note:

±       Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.

 

±       Reservation for SC/ST/PWD category exists in self sponsored category.

 

±       Age relaxation upto 5 years for SC/ST candidates.

 

±       The Institute is not responsible for any postal delay.

 

±       The seats advertised are provisional and the Institute reserves the right to increase or

Decrease the number of seats.

 

±       The rules made by the Institute regarding selection and closure of the admissions shall be

Final and the Institute reserves the right to alter, vary, change and / or modify the rules

governing the admissions.

 

±       Candidates are advised to refer the prospectus for further details.

 

To more Information Click here

Closing Date:
NA
Comments:

Last date for submission of filled–in applications (upto 5.00 pm at CITD): 23.06.08

Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08

 

Course Fee: - Rs.12, 000/- per year

 

            To more Information about this course Click here

Related Web Pages

ADMISSION ALERTSENTRANCE EXAM ALERTSVTUEEE 2017, XLRI RAPT 2017, AIIMS PG DOCTORAL 2017, CBSE UGC NET 2017, NCAT 2017, NSTSE 2017, X-GMAT 2017, OPENMAT-XLI 2017, NMAT 2017IIFT MBA (IB) 2017, JAM 2017, GATE 2017, LSAT 2017, KIITEE 2017, LPUNEST MBA 2017, AIMA UGAT 2017, NID DAT 2017, GSIB ENTRANCE TEST GET 2017, MITID-DAT-2017, XAT 2017, AEEE 2017, TISS RAT 2017, NEET MDS 2017, NMET 2017, IIAST 2017, KMAT 2017, TISS BAT 2017, TISSNET 2017, GPAT 2017, UPTET 2017, JEST 2017, UPSC CDS (I) 2017, X-GMAT 2017, LPUNEST 2017, AICTE CMAT 2017, JEE MAIN 2017JEE ADVANCED 2017UPESEAT 2017ULSAT 2017NIFT Test 2017AILET 2017DNB CET SS 2017, NCHM JEE 2017, AFCAT 2017, X-GMAT 2017, IGNOU OPENMAT XLI 2017, VITEEE 2017, V-SAT 2017, GITAM GAT 2017, UPES MET 2017, SRMJEEE 2017, AIMA MAT FEBRUARY 2017, AIIMS (MBBS) 2017, IMU CET 2017, UID APTITUDE TEST 2017, IIT HSEE 2017, CLAT 2017, NEST 2017, BITSAT 2017, SAAT 2017, ITSAT 2017, MCAER-CET 2017, KERALA SET 2017, BEEE 2017, SLIET SET 2017, PAF ENTRANCE EXAM 2017, SEAT 2017, WBJEE 2017, IDAT 2017, TRIPURA JEE 2017, SOFT CET 2017, PUNE, PU MET 2017, NDA ENTRANCE 2017, MAHARASHTRA CET 2017, AILET 2017, BMAT 2017, HITSEEE 2017, AIIMS MBBS ENTRANCE 2017, TANCET 2017, UPSEE 2017, NATA 2017, ODISHA JEE 2017, NMIMS NPAT 2017, SIU SET 2017, KEAM (KERALA) 2017, NIMCET 2017,  BHU PET 2017, IPU CET 2017, UPSC CSP 2017, JIPMER MBBS 2017, AP EAMCET 2017, COMEDK UGET 2017, CBSE NEET UG 2017, HPNLET 2017, DEET 2016CEED 2016NUPGET 2016, UPCMET 2016UPESDAT 2016DURCET 2016CBSE AIPMT 2016COMEDK PGET 2016KEE 2016UPSC NDA 2016BLDEU PGET 2016AIPGMEE 2016, MU OET 2016APIIT NAT 2016MICAT 2016KARNATAKA PG CET 2016PIMS AICET PG 2016TIFR GS 2016JNU CBEE 2016, JNUEE 2016,  CUSAT CAT 2016, CAT 2016, GNAT 2016, CSIR UGC (NET) 2016CPMEE (UTTARAKHAND) 2016, BCECE 2016, AIPVT 2016AU CRET 2016UPSC Geo-scientist 2016, MHT CET 2016DAVV CET 2016, DU SET 2016, NIPER JEE 2016, CPMT UP 2016, DNB CET JULY 2016, SIU PET 2016, IISER BS-MS 2016, JOINT CSIR UGC TEST 2016, AIMA RMAT 2016, PIMS AICET UG 2016, BHU PET 2016, TNSET 2016, MP DMAT 2016, MANAGEMENT COURSES, BIOTECHNOLOGY, ENGINEERING, FASHION DESIGNING, MASS MEDIA, INFORMATION TECHNOLOGY, LAW, DISTANCE LEARNING, MEDICAL, STUDY ABROAD, AMITY UNIVERSITY, NOIDA, KURUKSHETRA UNIVERSITY, I P UNIVERSITY, EXAM RESULTS, SCHOLARSHIPS, SMU, MANIPAL, RGTU, JAMIA MILLIA ISLAMIA, AIIMS, MGIMS WARDHA, NIRD, JNU, HPU, SCDL, IIFT, GRE, TOEFL, SAT, BVIMR, ICFAI, DEHRADUN, CMC, VELLORE, DELHI UNIVERSITY, BHU UNIVERSITY VARANASI, MDI GURGAONIRMA, RGPV, AFMC, CTET 2016, UTU UNIVERSITY