College Details
College Detail

Central Institute of Tool Design, CITD, Hyderabad

MSME Tool Room, Hyderabad
Balanagar, Hyderabad
Hyderabad
Andhra Pradesh
Phone-No: 91-40-23772748 2749 6178
Fax: 91-40-23772658
Email: adminltrg@citdindia.org
Website:
Establish:1968
AdmissionNews Notification
AdmissionNews Notification
About College:

Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:






·         Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.






·         Design & Manufacture of dies, jigs, fixtures and guages, etc.






·         Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.






·         Recommending measures to standardise components for dies, jigs and other tools.


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 1½ years 60 13 Aug 2019 n

Course Name:

PG Diploma in Tool Design and CAD and CAM PGDTDCC

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in Tool Design and CAD/ CAM (PGDTDCC)
Parttime:
n
Fee:
Rs. 35,000/- Per Semester
Eligibility:
Eligibility and Selection Procedure for PG Diploma in Tool Design and CAD and CAM PGDTDCC in Central Institute of Tool Design, CITD, Hyderabad

B. E. /B. Tech in Mechanical Engineering/Production Engineering or Equivalent

Age Limit: 45 years

How To Apply:
Application Procedure for PG Diploma in Tool Design and CAD and CAM PGDTDCC in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad)

Or

By Online at www.citdindia.org by selecting PAY ONLINE SBI Payment Gateway Click the Check Box Proceed Select State of Corporate/Institution All India Select Type of Corporate or Institution Select Educational Institutions Select Educational Institutions Name Central Institute of Tool Design Select Payment Category Select Application Fee Select Training Center Location Select Hyderabad Select Long Term Course Select PGTD or PDTD (as desired by you) Fill relevant details & click submit.

·          For Post Graduate Diploma Course Rs.800/- for general and Rs 400/- for SC/ST category.

However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

Mode of Application

Application Form & Prospectus can be downloaded from our website under the link “PGDTD & CC and PDTD Admission Notification-2019” and the filled in application form can be sent to The Director (Trg.), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost.

Closing Date:
14 Aug 2019
Comments:

Availability of applications: 8th July, 2019 (Monday)
Last date for receipt of filled-in application: 14th August, 2019 (Wednesday)
Date of Entrance Exam (Tentative): 18th August, 2019 (Sunday)
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 1 years 60 13 Aug 2019 n

Course Name:

Post Diploma in Tool Design PDTD

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Diploma in Tool Design (PDTD)
Parttime:
n
Fee:
Rs. 25,000/- Per Semester
Eligibility:
Eligibility and Selection Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad

Diploma in Mechanical Engineering/Tool,Die and Mould Making or Equivalent

Age Limit: 27 Years

How To Apply:
Application Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad)

Or

By Online at www.citdindia.org by selecting PAY ONLINE SBI Payment Gateway Click the Check Box Proceed Select State of Corporate/Institution All India Select Type of Corporate or Institution Select Educational Institutions Select Educational Institutions Name Central Institute of Tool Design Select Payment Category Select Application Fee Select Training Center Location Select Hyderabad Select Long Term Course Select PGTD or PDTD (as desired by you) Fill relevant details & click submit.

·          For Post Diploma Course Rs.700/- for general and Rs.350/ for SC/ST category candidates For PWD candidates fully exempted.

However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

Mode of Application

Application Form & Prospectus can be downloaded from our website under the link “PGDTD & CC and PDTD Admission Notification-2019” and the filled in application form can be sent to The Director (Trg.), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost.

Closing Date:
14 Aug 2019
Comments:

Availability of applications: 8th July, 2019 (Monday)
Last date for receipt of filled-in application: 14th August, 2019 (Wednesday)
Date of Entrance Exam (Tentative): 18th August, 2019 (Sunday)
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 2 Years 32 06 Jun 2019 n

Course Name:

Master of Engineering Mechanical CADCAM MECC

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Engineering Mechanical - CAD/CAM - (MECC)
Parttime:
n
Fee:
,
Eligibility:
Eligibility and Selection Procedure for Master of Engineering Mechanical CADCAM MECC in Central Institute of Tool Design, CITD, Hyderabad

B.E. / B. Tech. in Mechanical/ Production / Mechatronics or equivalent. Minimum of 55% marks in the qualifying examination

Age Limit: 45 Years

How To Apply:
Application Procedure for Master of Engineering Mechanical CADCAM MECC in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application:

Application form can be downloaded from our website under the link “M.E. Admission Notification-2019” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost ? 800/- for General and ? 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

PWD candidates are fully exempted from paying the application cost.

Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2019”

Closing Date:
13 Jun 2019
Comments:

Availability of applications: 6th May, 2019 (Monday)
Last date for receipt of filled-in application: 13th June, 2019 (Thursday)
Date of Entrance exam (Tentative): 16th June, 2019 (Sunday) Centre of Entrance Examination: Hyderabad
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Fashion Technology 2 Years 32 06 Jun 2019 n

Course Name:

Master of Engineering in Tool Design METD

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Engineering in Tool Design (METD)
Parttime:
n
Fee:
,
Eligibility:
Eligibility and Selection Procedure for Master of Engineering in Tool Design METD in Central Institute of Tool Design, CITD, Hyderabad

B.E. / B. Tech. in Mechanical/ Production / Mechatronics or equivalent. Minimum of 55% marks in the qualifying examination

Age Limit: 45 Years

How To Apply:
Application Procedure for Master of Engineering in Tool Design METD in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application:

Application form can be downloaded from our website under the link “M.E. Admission Notification-2019” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost ? 800/- for General and ? 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

PWD candidates are fully exempted from paying the application cost.

Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2019”

Closing Date:
13 Jun 2019
Comments:

Availability of applications: 6th May, 2019 (Monday)
Last date for receipt of filled-in application: 13th June, 2019 (Thursday)
Date of Entrance exam (Tentative): 16th June, 2019 (Sunday) Centre of Entrance Examination: Hyderabad
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 2 years 32 06 Jun 2019 n

Course Name:

ME Design for Manufacture MEDFM

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
M.E. Design for Manufacture (MEDFM)
Parttime:
n
Fee:
,
Eligibility:
Eligibility and Selection Procedure for ME Design for Manufacture MEDFM in Central Institute of Tool Design, CITD, Hyderabad

B.E. / B. Tech. Mechanical/Production/ Mechatronics/ Automobile / Aeronautical or equivalent. Minimum of 55% of marks in the qualifying examination

Age Limit: 45 Years

How To Apply:
Application Procedure for ME Design for Manufacture MEDFM in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application:

Application form can be downloaded from our website under the link “M.E. Admission Notification-2019” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost ? 800/- for General and ? 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

PWD candidates are fully exempted from paying the application cost.

Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2019”

Closing Date:
13 Jun 2019
Comments:

Availability of applications: 6th May, 2019 (Monday)
Last date for receipt of filled-in application: 13th June, 2019 (Thursday)
Date of Entrance exam (Tentative): 16th June, 2019 (Sunday) Centre of Entrance Examination: Hyderabad
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 4 Years . 01 Apr 2019 n

Course Name:

Diploma in Tool Die and Mould Making DTDM

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma in Tool, Die and Mould Making (DTDM)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma in Tool Die and Mould Making DTDM in Central Institute of Tool Design, CITD, Hyderabad

10th Pass with 50% for general & 45% for SC / ST.

Age Limit:

Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.

How To Apply:
Application Procedure for Diploma in Tool Die and Mould Making DTDM in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application

Application form can be downloaded from our website www.citdindia.org under the link “Diploma Admission Notification-2019” and the filled in application forms can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500037, along with prescribed application cost Rs. 700/- for General and Rs. 350/- for SC/ST category and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer; by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online through the website (detailed steps of online payment can be found from prospectus).

Centre of Entrance Examination: Hyderabad

Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2019”

Closing Date:
27 Apr 2019
Comments:

Last date for receipt of filled-in application: 27th April, 2019 (Saturday)
Last date for receipt of filled-in application with late fee of Rs.500/-: 2nd May, 2018(Thursday)
Date of Entrance exam (Tentative): 5th May, 2019 (Sunday) 
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Years . 01 Apr 2019 n

Course Name:

Diploma in Automation and Robotics Engineering DARE

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma in Automation and Robotics Engineering (DARE)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma in Automation and Robotics Engineering DARE in Central Institute of Tool Design, CITD, Hyderabad

10th Pass

Age Limit:

Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.

How To Apply:
Application Procedure for Diploma in Automation and Robotics Engineering DARE in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application

Application form can be downloaded from our website www.citdindia.org under the link “Diploma Admission Notification-2019” and the filled in application forms can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500037, along with prescribed application cost Rs. 700/- for General and Rs. 350/- for SC/ST category and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer; by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online through the website (detailed steps of online payment can be found from prospectus).

Centre of Entrance Examination: Hyderabad

Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2019”

Closing Date:
27 Apr 2019
Comments:

Last date for receipt of filled-in application: 27th April, 2019 (Saturday)
Last date for receipt of filled-in application with late fee of Rs.500/-: 2nd May, 2018 (Thursday)
Date of Entrance exam (Tentative): 5th May, 2019 (Sunday) 
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 3 Years . 01 Apr 2019 n

Course Name:

Diploma in Electronics and Communication Engineering DECE

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma in Electronics and Communication Engineering (DECE)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma in Electronics and Communication Engineering DECE in Central Institute of Tool Design, CITD, Hyderabad

10th Pass

Age Limit:

Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.

How To Apply:
Application Procedure for Diploma in Electronics and Communication Engineering DECE in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application

Application form can be downloaded from our website www.citdindia.org under the link “Diploma Admission Notification-2019” and the filled in application forms can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500037, along with prescribed application cost Rs. 700/- for General and Rs. 350/- for SC/ST category and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer; by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online through the website (detailed steps of online payment can be found from prospectus).

Centre of Entrance Examination: Hyderabad

Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2019”

Closing Date:
27 Apr 2019
Comments:

Last date for receipt of filled-in application: 27th April, 2019 (Saturday)
Last date for receipt of filled-in application with late fee of Rs.500/-: 2nd May, 2018 (Thursday)
Date of Entrance exam (Tentative): 5th May, 2019 (Sunday) 
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 3 Years . 01 Apr 2019 n

Course Name:

Diploma in Production Engineering DPE

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma in Production Engineering (DPE)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Diploma in Production Engineering DPE in Central Institute of Tool Design, CITD, Hyderabad

10th Pass

Age Limit:

Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.

How To Apply:
Application Procedure for Diploma in Production Engineering DPE in Central Institute of Tool Design, CITD, Hyderabad

Mode of Application

Application form can be downloaded from our website www.citdindia.org under the link “Diploma Admission Notification-2019” and the filled in application forms can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500037, along with prescribed application cost Rs. 700/- for General and Rs. 350/- for SC/ST category and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer; by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online through the website (detailed steps of online payment can be found from prospectus).

Centre of Entrance Examination: Hyderabad

Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2019”

Closing Date:
27 Apr 2019
Comments:

Last date for receipt of filled-in application: 27th April, 2019 (Saturday)
Last date for receipt of filled-in application with late fee of Rs.500/-: 2nd May, 2018(Thursday)
Date of Entrance exam (Tentative): 5th May, 2019 (Sunday) 
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 2 Years . 20 Jul 2018 n

Course Name:

MTech Mechatronics

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Technology (MTech) Mechatronics
Parttime:
n
Fee:
Rs.51,000 per semester
Eligibility:
Eligibility and Selection Procedure for MTech Mechatronics in Central Institute of Tool Design, CITD, Hyderabad

B.E. / B. Tech. in Mechanical/ ECE/EEE/EIE/Mechatronics/Automobile/Aeron autical Engineering or equivalent. Minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE.
Age Limit: 45 years (Except Sponsored Candidates)
Course Fee: Rs. 41,000/- per semester, Industrial Sponsored – Rs.51,000 per semester

How To Apply:
Application Procedure for MTech Mechatronics in Central Institute of Tool Design, CITD, Hyderabad

Application form can be downloaded from our website www.citdindia.org (From 25th June 2018) and the filled in application forms can be sent to 
The Director (Training), 
Central Institute of Tool Design, 
Balanagar, Hyderabad-500 037 
Along with prescribed application cost. The envelope should be super scribed with “Application for “M.Tech Mechatronics”. Candidates are advised to refer the prospectus for details available at our website. 
Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or by Online Rs.800/- for general and Rs 400/- for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Centre of Examination: JNTUH, College of Engineering, Kukatpally, Hyderabad

Closing Date:
21 Jul 2018
Comments:

Last date for submission of Application by 5.00 PM: 21st July, 2018 (Saturday)
Last date for submission of Applications with late fee of Rs. 500/-: 28th July 2018 (Saturday)
Date of Examination: 5th August, 2018 (Sunday)
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 1 year 60 16 Jul 2018 n

Course Name:

Post Diploma in Tool Design and CAD CAM PDTDCADCAM

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Diploma in Tool Design and CAD/CAM (PDTDCAD/CAM)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Post Diploma in Tool Design and CAD CAM PDTDCADCAM in Central Institute of Tool Design, CITD, Hyderabad

Diploma in Mechanical Engineering,Tool,Die and Mould Making or Equivalent)
Age Limit: 27 years

How To Apply:
Application Procedure for Post Diploma in Tool Design and CAD CAM PDTDCADCAM in Central Institute of Tool Design, CITD, Hyderabad

Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to 
The Director (Training), 
Central Institute of Tool Design, 
Balanagar, Hyderabad-500 037
Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.
Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Closing Date:
26 Jul 2018
Comments:

Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)
Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)
Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 1½ years 40 16 Jul 2018 n

Course Name:

PG Diploma in Mechatronics PGIM

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in Mechatronics (PGIM)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for PG Diploma in Mechatronics PGIM in Central Institute of Tool Design, CITD, Hyderabad

Bachelor of Engineering/Bachelor of Technology in Mechanical Engineering/Prod. Engineering/Electronics Engineering/ Electrical Engineering/Instrumentation Engineering or Equivalent.
Age Limit: 45 years

How To Apply:
Application Procedure for PG Diploma in Mechatronics PGIM in Central Institute of Tool Design, CITD, Hyderabad

Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to 
The Director (Training), 
Central Institute of Tool Design, 
Balanagar, Hyderabad-500 037
Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.
Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Closing Date:
26 Jul 2018
Comments:

Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)
Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)
Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 1½ years 40 16 Jul 2018 n

Course Name:

PG Diploma in VLSI PGDVLSI

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in VLSI (PGDVLSI)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for PG Diploma in VLSI PGDVLSI in Central Institute of Tool Design, CITD, Hyderabad

Bachelor of Engineering/Bachelor of Technology in Electronics and Communication/Electrical and Electronics/Instrumentation or Equivalent
Age Limit: 45 years

How To Apply:
Application Procedure for PG Diploma in VLSI PGDVLSI in Central Institute of Tool Design, CITD, Hyderabad

Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to 
The Director (Training), 
Central Institute of Tool Design, 
Balanagar, Hyderabad-500 037
Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.
Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Closing Date:
26 Jul 2018
Comments:

Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)
Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)
Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 1½ years 40 16 Jul 2018 n

Course Name:

PG Diploma in Embedded Systems PGDES

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in Embedded Systems (PGDES)
Parttime:
y
Fee:
.
Eligibility:
Eligibility and Selection Procedure for PG Diploma in Embedded Systems PGDES in Central Institute of Tool Design, CITD, Hyderabad

Bachelor of Engineering/Bachelor of Technology in Electronics and Communication/Electrical and Electronics/Instrumentation or Equivalent
Age Limit: 45 years

How To Apply:
Application Procedure for PG Diploma in Embedded Systems PGDES in Central Institute of Tool Design, CITD, Hyderabad

Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to 
The Director (Training), 
Central Institute of Tool Design, 
Balanagar, Hyderabad-500 037
Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.
Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Closing Date:
26 Jul 2018
Comments:

Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)
Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)
Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.
Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 12 Months . 13 Jan 2018 n

Course Name:

Advance Certificate Course in CNC Machining

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Advance Certificate Course in CNC Machining
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Advance Certificate Course in CNC Machining in Central Institute of Tool Design, CITD, Hyderabad

I.T.I. (Machinist, Turner, Bench Fitter, Tool and Die Maker of Equipment

How To Apply:
Application Procedure for Advance Certificate Course in CNC Machining in Central Institute of Tool Design, CITD, Hyderabad

1. Education Loan Facility available, in State Bank of India for the above programs, however Terms & Conditions of bank are applicable.


2. For SC, ST Candidates fee waiver will be provided as per Govt. of India Norms, Reg. Fee Rs. 1000/- to be paid.


3. Placement Assistance will be provided through CITD’s placement cell


4. The above mentioned courses will be commenced on 1st and 03rd Wednesday of every month.


5. Limited hostel facility is available on chargeable basis.


6. For admission, the candidates have to submit the necessary documents.


7. For further information visit our website www.citdindia.org

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 6 Months . 13 Jan 2018 n

Course Name:

Certificte Course in In CNC Milling

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Certificte Course in In CNC Milling
Parttime:
n
Fee:
'
Eligibility:
Eligibility and Selection Procedure for Certificte Course in In CNC Milling in Central Institute of Tool Design, CITD, Hyderabad

SSC Passed Or its Equivalent, Minimum Age 15 Years

How To Apply:
Application Procedure for Certificte Course in In CNC Milling in Central Institute of Tool Design, CITD, Hyderabad

1. Education Loan Facility available, in State Bank of India for the above programs, however Terms & Conditions of bank are applicable.


2. For SC, ST Candidates fee waiver will be provided as per Govt. of India Norms, Reg. Fee Rs. 1000/- to be paid.


3. Placement Assistance will be provided through CITD’s placement cell


4. The above mentioned courses will be commenced on 1st and 03rd Wednesday of every month.


5. Limited hostel facility is available on chargeable basis.


6. For admission, the candidates have to submit the necessary documents.


7. For further information visit our website www.citdindia.org

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 6 Months . 13 Jan 2018 n

Course Name:

Advance Embedded Technology

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Advance Embedded Technology
Parttime:
n
Fee:
'
Eligibility:
Eligibility and Selection Procedure for Advance Embedded Technology in Central Institute of Tool Design, CITD, Hyderabad

Diploma or Degree in Electrical, Electronics, Computer, Biomedical, IT, Instrumentation. B.Sc, M.Sc. in (I.T., Electronics, Physics)

How To Apply:
Application Procedure for Advance Embedded Technology in Central Institute of Tool Design, CITD, Hyderabad

1. Education Loan Facility available, in State Bank of India for the above programs, however Terms & Conditions of bank are applicable.


2. For SC, ST Candidates fee waiver will be provided as per Govt. of India Norms, Reg. Fee Rs. 1000/- to be paid.


3. Placement Assistance will be provided through CITD’s placement cell


4. The above mentioned courses will be commenced on 1st and 03rd Wednesday of every month.


5. Limited hostel facility is available on chargeable basis.


6. For admission, the candidates have to submit the necessary documents.


7. For further information visit our website www.citdindia.org

Closing Date:
NA
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Semester 60 23 Nov 2016 n

Course Name:

Post Graduation in Tool Die Mould Design PGTD

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduation in Tool, Die & Mould Design (PGTD)
Parttime:
n
Fee:
.
Eligibility:
Eligibility and Selection Procedure for Post Graduation in Tool Die Mould Design PGTD in Central Institute of Tool Design, CITD, Hyderabad

Qualification: BE, BTech (Mech, Prodn) or equivalent.

Age limit: 45 years

How To Apply:
Application Procedure for Post Graduation in Tool Die Mould Design PGTD in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:
01 Jan 1900
Comments:

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot


Category Duration Seats Opening Date Hostel
Engineering 2 Years . 26 Aug 2014 n

Course Name:

Master of Technology MTech - Robotics Automation

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master of Technology (MTech) - Robotics & Automation in collaboration with JNTUH, Hyderabad
Parttime:
n
Fee:
'
Eligibility:
Eligibility and Selection Procedure for Master of Technology MTech - Robotics Automation in Central Institute of Tool Design, CITD, Hyderabad

Qualification: B.E /B.Tech (Electronics and Communication/Mechanical Engineering/ Electrical and Electronics/ Electronics and Instrumentation/Aeronautical/Automobile Engg (OR) Equivalent) with 55% marks.

How To Apply:
Application Procedure for Master of Technology MTech - Robotics Automation in Central Institute of Tool Design, CITD, Hyderabad

Application form and prospectus can be obtained from Training Department, MSME-Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad-500037, on any working day between 09.30 am & 05.00 pm (Weekly holiday on Sunday) by paying application cost prescribed by cash or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

Candidates who wish to consider their application under sponsored category should submit the Xerox copies of sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the CITD entrance examination subject to fulfilling the other criteria applicable to the category Reservation for SC/ST/PWD quota exists as per Govt. of India norms

For further details, please contact: Training Department Tel Phone No. 23771959, 23776156, Fax No. 040-23772658, Visit us at: www.citdindia.org, Email: citdplacements@citdindia.org

Closing Date:
09 Sep 2014
Comments:

Last date for Submission form: 09th September, 2014

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot 


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 6 Months NA n

Course Name:

Master Certificate in CAD/CAM (M CAD / CAM)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Master Certificate in CAD/CAM (M CAD / CAM)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Master Certificate in CAD/CAM (M CAD / CAM) in Central Institute of Tool Design, CITD, Hyderabad

Degree/Diploma in Mechanical Engineering or Equivalent.

Course Fee: Rs. 40,000/-'for SSI & Individuals, Rs. 53,500/- for Govt. Org. & Major Industries. Fee can be paid in 3 installments.

How To Apply:
Application Procedure for Master Certificate in CAD/CAM (M CAD / CAM) in Central Institute of Tool Design, CITD, Hyderabad

Information for the above courses is also available at Vijayawada Sub centre and Extension centre Chennai

1.      Address: 54-2-9, Phase III, Autonagar, .Vijayawada - 520 007, Ph. No. 0866-2540560.

2.      Address: MSME-Dl, Annexe Building, 65/1, G.S.T.Road, Guindy, Chennai-600032. Phone.044-22500366.

Please Address

MSME-TOOL ROOM, HYDERABAD CENTRAL INSTITUTE OF TOOL DESIGN

(Ministry of MSME - A Govt, of India Society)

Balanugar Hyderabad 500037

Phone no. 23772749, 23776178, 23772747-Extn.213, Fax: 23772658

Mobile: - +91 9849443056, +91 9440963987

E-mail citdcadcam@citdindia.org Website, www.citdindia.orq

Closing Date:
01 Jan 1900
Comments:

To know more information about CITD Hyderabad Admission please visit www.citdindia.org

Please click the following link for other valuable news available on our Blog: - India Admission Alert Blog  ~~!!~~ Career Counseling Blog ~~!!~~ Admission News Blog ~~!!~~ My Admission News Blog

 


Category Duration Seats Opening Date Hostel
Engineering 2 Years NA n

Course Name:

Diploma in Tool Engineering (DTE Evening)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Diploma in Tool Engineering (DTE Evening)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Diploma in Tool Engineering (DTE Evening) in Central Institute of Tool Design, CITD, Hyderabad

A pass in two years ITI Course with fitter/Machinist/Tool & Die Maker/Turner/Mechanical Draughtsman trade or a pass in Two years intermediate with MPC group & with minimum 3 years full time practical experience in Mechanical Engg. Industry.

Course Fee: Rs.12, 600/- per year Self-Sponsored & Rs.19, 000/- per year Industry sponsored the fee includes charges for AutoCAD training.

No. of seats: 50 seats (Self Sponsored) & 10 seats (Industry sponsored)

How To Apply:
Application Procedure for Diploma in Tool Engineering (DTE Evening) in Central Institute of Tool Design, CITD, Hyderabad

(a) Application form and prospectus can be obtained form training department, Central Institute of Tool Design, Hyderabad-37. on any working day between 9.30am to 5pm. on payment Rs. 300/- only (for SC/ST candidates Rs.150/-for PWD fully exempted) by Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised Bank.

(b) Application form can also be downloaded form our website www.citdindia.org and filled in application form can be sent to the Director(Trg.), CITD, Balanagar Hyderabad-37 along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised

Bank.

 

à      Click here to download the application form

Closing Date:
15 Dec 2009
Comments:

Last date for submission of applications: 15th December 2009 

To know more Information about this course click here


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 2 Years (4 semesters) 30 NA n

Course Name:

Advanced Tool Makers Course (ATM)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Advanced Tool Makers Course (ATM)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Advanced Tool Makers Course (ATM) in Central Institute of Tool Design, CITD, Hyderabad

SSC/Matric with ITI in any one of the trades-Tool and Die Maker/Fitter/Machinist/Turner

 

Mode of Selection:

±       Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course.

 

±       Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category.

 

±       For ATM course, the candidates will be selected based on merit in the qualifying Examination i.e. X class & ITI with weight age in the ratio of 50:50 respectively For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed) Tentative Date Of Examination: 06.07.08 (Sunday) at Hyderabad.

 

Age: 25 years (not born before 31.08.1983)

How To Apply:
Application Procedure for Advanced Tool Makers Course (ATM) in Central Institute of Tool Design, CITD, Hyderabad

1.      Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

2.      Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

3.      Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

 

Note:

±       Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.

 

±       Reservation for SC/ST/PWD category exists in self sponsored category.

 

±       Age relaxation upto 5 years for SC/ST candidates.

 

±       The Institute is not responsible for any postal delay.

 

±       The seats advertised are provisional and the Institute reserves the right to increase or

Decrease the number of seats.

 

±       The rules made by the Institute regarding selection and closure of the admissions shall be

Final and the Institute reserves the right to alter, vary, change and / or modify the rules

governing the admissions.

 

±       Candidates are advised to refer the prospectus for further details.

 

To more Information Click here

Closing Date:
23 Jun 2008
Comments:

Last date for submission of filled–in applications (upto 5.00 pm at CITD): 23.06.08

Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08

 

Course Fee: - Rs.12, 000/- per year

 

            To more Information about this course Click here


Category Duration Seats Opening Date Hostel
Miscellaneous Courses 3 Years (6 semesters) 30 NA n

Course Name:

Advanced Machinist Course (AMC)

in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Advanced Machinist Course (AMC)
Parttime:
n
Fee:
Eligibility:
Eligibility and Selection Procedure for Advanced Machinist Course (AMC) in Central Institute of Tool Design, CITD, Hyderabad

SSC (10th Class) or equivalent examination appeared but failed with Maths and Science as subjects.

 

Mode of selection: - Selection on the basis of marks obtained in Maths and Science subjects

In the qualifying examination that is 10th class failed.

 

Age: 15 – 24 years (not born before 31.8.1984).

How To Apply:
Application Procedure for Advanced Machinist Course (AMC) in Central Institute of Tool Design, CITD, Hyderabad

1.      Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

2.      Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

 

3.      Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

 

Note:

±       Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.

 

±       Reservation for SC/ST/PWD category exists in self sponsored category.

 

±       Age relaxation upto 5 years for SC/ST candidates.

 

±       The Institute is not responsible for any postal delay.

 

±       The seats advertised are provisional and the Institute reserves the right to increase or

Decrease the number of seats.

 

±       The rules made by the Institute regarding selection and closure of the admissions shall be

Final and the Institute reserves the right to alter, vary, change and / or modify the rules

governing the admissions.

 

±       Candidates are advised to refer the prospectus for further details.

 

To more Information Click here

 

Closing Date:
23 Jun 2008
Comments:

Last date for submission of filled–in applications (upto 5.00 pm at CITD): 23.06.08

Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08  

 

Course Fee: - Rs.6, 000/- per semester

 

            To more Information about this course Click here

Related Web Pages

ADMISSION ALERTSENTRANCE EXAM ALERTSVTUEEE 2017, XLRI RAPT 2017, AIIMS PG DOCTORAL 2017, CBSE UGC NET 2017, NCAT 2017, NSTSE 2017, X-GMAT 2017, OPENMAT-XLI 2017, NMAT 2017IIFT MBA (IB) 2017, JAM 2017, GATE 2017, LSAT 2017, KIITEE 2017, LPUNEST MBA 2017, AIMA UGAT 2017, NID DAT 2017, GSIB ENTRANCE TEST GET 2017, MITID-DAT-2017, XAT 2017, AEEE 2017, TISS RAT 2017, NEET MDS 2017, NMET 2017, IIAST 2017, KMAT 2017, TISS BAT 2017, TISSNET 2017, GPAT 2017, UPTET 2017, JEST 2017, UPSC CDS (I) 2017, X-GMAT 2017, LPUNEST 2017, AICTE CMAT 2017, JEE MAIN 2017JEE ADVANCED 2017UPESEAT 2017ULSAT 2017NIFT Test 2017AILET 2017DNB CET SS 2017, NCHM JEE 2017, AFCAT 2017, X-GMAT 2017, IGNOU OPENMAT XLI 2017, VITEEE 2017, V-SAT 2017, GITAM GAT 2017, UPES MET 2017, SRMJEEE 2017, AIMA MAT FEBRUARY 2017, AIIMS (MBBS) 2017, IMU CET 2017, UID APTITUDE TEST 2017, IIT HSEE 2017, CLAT 2017, NEST 2017, BITSAT 2017, SAAT 2017, ITSAT 2017, MCAER-CET 2017, KERALA SET 2017, BEEE 2017, SLIET SET 2017, PAF ENTRANCE EXAM 2017, SEAT 2017, WBJEE 2017, IDAT 2017, TRIPURA JEE 2017, SOFT CET 2017, PUNE, PU MET 2017, NDA ENTRANCE 2017, MAHARASHTRA CET 2017, AILET 2017, BMAT 2017, HITSEEE 2017, AIIMS MBBS ENTRANCE 2017, TANCET 2017, UPSEE 2017, NATA 2017, ODISHA JEE 2017, NMIMS NPAT 2017, SIU SET 2017, KEAM (KERALA) 2017, NIMCET 2017,  BHU PET 2017, IPU CET 2017, UPSC CSP 2017, JIPMER MBBS 2017, AP EAMCET 2017, COMEDK UGET 2017, CBSE NEET UG 2017, HPNLET 2017, DEET 2016CEED 2016NUPGET 2016, UPCMET 2016UPESDAT 2016DURCET 2016CBSE AIPMT 2016COMEDK PGET 2016KEE 2016UPSC NDA 2016BLDEU PGET 2016AIPGMEE 2016, MU OET 2016APIIT NAT 2016MICAT 2016KARNATAKA PG CET 2016PIMS AICET PG 2016TIFR GS 2016JNU CBEE 2016, JNUEE 2016,  CUSAT CAT 2016, CAT 2016, GNAT 2016, CSIR UGC (NET) 2016CPMEE (UTTARAKHAND) 2016, BCECE 2016, AIPVT 2016AU CRET 2016UPSC Geo-scientist 2016, MHT CET 2016DAVV CET 2016, DU SET 2016, NIPER JEE 2016, CPMT UP 2016, DNB CET JULY 2016, SIU PET 2016, IISER BS-MS 2016, JOINT CSIR UGC TEST 2016, AIMA RMAT 2016, PIMS AICET UG 2016, BHU PET 2016, TNSET 2016, MP DMAT 2016, MANAGEMENT COURSES, BIOTECHNOLOGY, ENGINEERING, FASHION DESIGNING, MASS MEDIA, INFORMATION TECHNOLOGY, LAW, DISTANCE LEARNING, MEDICAL, STUDY ABROAD, AMITY UNIVERSITY, NOIDA, KURUKSHETRA UNIVERSITY, I P UNIVERSITY, EXAM RESULTS, SCHOLARSHIPS, SMU, MANIPAL, RGTU, JAMIA MILLIA ISLAMIA, AIIMS, MGIMS WARDHA, NIRD, JNU, HPU, SCDL, IIFT, GRE, TOEFL, SAT, BVIMR, ICFAI, DEHRADUN, CMC, VELLORE, DELHI UNIVERSITY, BHU UNIVERSITY VARANASI, MDI GURGAONIRMA, RGPV, AFMC, CTET 2016, UTU UNIVERSITY