Admission News logoAdmission News
  • home
  • Blog
  • courses
  • news
  • contact

+91 7838001392
  • Central Institute of Tool Design, CITD, Hyderabad

  • Address: Balanagar, Hyderabad, Hyderabad, Andhra Pradesh 500037
    Phone: 91-40-23772748 2749 6178
    FAX: 91-40-23772658
    Email: adminltrg@citdindia.org
    Website: www.citdindia.org
    About Central Institute of Tool Design:

    Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:






    ·         Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.






    ·         Design & Manufacture of dies, jigs, fixtures and guages, etc.






    ·         Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.






    ·         Recommending measures to standardise components for dies, jigs and other tools.

  • List of available courses
  • Course Name: PG Diploma in VLSI and Embedded Systems PGDVES
    Course Description: Post Graduate Diploma in VLSI and Embedded Systems (PGDVES)
    Opening Date: 08 Nov 2021
    Closing Date: 19 Nov 2021
    Category: Information Tech (IT)


    Eligibility:

    B.E./ B. Tech in Electronics and Communication/ Electrical and Electronics/Instrumentation or its equivalent.

    Age Limit: 45 years


    How to apply:

    Application form can be downloaded from our website under the link “P.G. Diploma Admission Notification-2021” or can be collected from CITD Admissions Desk at Room No. 102, Diploma Block on any working day from 10:00 a.m. to 05:00 p.m.

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at Official website (detailed steps of online payment can be found from prospectus.

    *SC and ST candidates are not required to pay any course fee; however other fee including application fee is to be paid by the candidate if she/he applies for or undertakes admission.

    Further details can be obtained from prospectus available on our website under the link “P.G. Diploma Admission Notification-2021”

    Contact Details

    Admissions Desk at Room No. 102

    Diploma Block

    Phone No.- 9502405170

    E-Mail-training@citdindia.org


    Comments:

    Availability of applications: 20th October, 2021 (Wednesday)

    Last date for receipt of online application: 19th November, 2021 (Friday)

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: PG Diploma in Tool Design and CAD and CAM PGDTDCC
    Course Description: Post Graduate Diploma in Tool Design and CAD/ CAM (PGDTDCC)
    Opening Date: 08 Nov 2021
    Closing Date: 19 Nov 2021
    Category: Information Tech (IT)


    Eligibility:

    B.E. / B. Tech. in Mechanical/ Production or its equivalent 
    Age Limit: 45 years


    How to apply:

    Application form can be downloaded from our website under the link “P.G. Diploma Admission Notification-2021” or can be collected from CITD Admissions Desk at Room No. 102, Diploma Block on any working day from 10:00 a.m. to 05:00 p.m.

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at Official website (detailed steps of online payment can be found from prospectus.

    *SC and ST candidates are not required to pay any course fee; however other fee including application fee is to be paid by the candidate if she/he applies for or undertakes admission.

    Further details can be obtained from prospectus available on our website under the link “P.G. Diploma Admission Notification-2021”

    Contact Details

    Admissions Desk at Room No. 102

    Diploma Block

    Phone No.- 9502405170

    E-Mail-training@citdindia.org


    Comments:

    Availability of applications: 20th October, 2021 (Wednesday)
    Last date for receipt of online application: 19th November, 2021 (Friday)
    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Post Graduate Diploma in Mechatronics PGDM
    Course Description: Post Graduate Diploma in Mechatronics (PGDM)
    Opening Date: 08 Nov 2021
    Closing Date: 19 Nov 2021
    Category: Information Tech (IT)


    Eligibility:

    B.E./ B. Tech in Mechanical Engineering / Production Engineering / Electronics Engineering / Electrical Engineering /

    Instrumentation Engineering or its equivalent.

    Age Limit: 45 years


    How to apply:

    Application form can be downloaded from our website under the link “P.G. Diploma Admission Notification-2021” or can be collected from CITD Admissions Desk at Room No. 102, Diploma Block on any working day from 10:00 a.m. to 05:00 p.m.

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at Official website (detailed steps of online payment can be found from prospectus.

    *SC and ST candidates are not required to pay any course fee; however other fee including application fee is to be paid by the candidate if she/he applies for or undertakes admission.

    Further details can be obtained from prospectus available on our website under the link “P.G. Diploma Admission Notification-2021”

    Contact Details

    Admissions Desk at Room No. 102

    Diploma Block

    Phone No.- 9502405170

    E-Mail-training@citdindia.org


    Comments:

    Availability of applications: 20th October, 2021 (Wednesday)

    Last date for receipt of online application: 19th November, 2021 (Friday)

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Master of Engineering Mechanical CADCAM MECC
    Course Description: Master of Engineering Mechanical - CAD/CAM - (MECC) 21st Batch
    Opening Date: 20 Sep 2021
    Closing Date: 09 Oct 2021
    Category: Engineering


    Eligibility:

    B.E. / B. Tech. in Mechanical/ Production / Mechatronics or equivalent. Minimum of 55% marks in the qualifying examination
    Age Limit: 45 Years


    How to apply:

    Mode of Application:

    Application form can be downloaded from our website under the link “M.E. Admission Notification-2021” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost ? 800/- for General and ? 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

    PWD candidates are fully exempted from paying the application cost.

    Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2021”


    Comments:

    Availability of applications: 6th September, 2021 (Monday)

    Last date for receipt of filled-in application: 9th October, 2021 (Saturday)

    Date of Online Entrance exam (Tentative): 17th October, 2021 (Sunday) Centre of Entrance Examination: Hyderabad

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Master of Engineering in Tool Design METD
    Course Description: Master of Engineering in Tool Design (METD) 20th Batch
    Opening Date: 20 Sep 2021
    Closing Date: 09 Oct 2021
    Category: Fashion Technology


    Eligibility:

    B.E. / B. Tech. in Mechanical/ Production / Mechatronics or equivalent. Minimum of 55% marks in the qualifying examination
    Age Limit: 45 Years


    How to apply:

    Mode of Application:

    Application form can be downloaded from our website under the link “M.E. Admission Notification-2021” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost Rs. 800/- for General and Rs. 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

    PWD candidates are fully exempted from paying the application cost.

    Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2021”


    Comments:

    Availability of applications: 6th September, 2021 (Monday)

    Last date for receipt of filled-in application: 9th October, 2021 (Saturday)

    Date of Online Entrance exam (Tentative): 17th October, 2021 (Sunday) Centre of Entrance Examination: Hyderabad

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: ME Design for Manufacture MEDFM
    Course Description: M.E. Design for Manufacture (MEDFM) 8th Batch
    Opening Date: 20 Sep 2021
    Closing Date: 09 Oct 2021
    Category: Miscellaneous Courses


    Eligibility:

    B.E. / B. Tech. Mechanical/Production/ Mechatronics/ Automobile / Aeronautical or equivalent. Minimum of 55% of marks in the qualifying examination 
    Age Limit: 45 Years


    How to apply:

    Mode of Application:

    Application form can be downloaded from our website under the link “M.E. Admission Notification-2021” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost ? 800/- for General and ? 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

    PWD candidates are fully exempted from paying the application cost.

    Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2021”


    Comments:

    Availability of applications: 6th September, 2021 (Monday)

    Last date for receipt of filled-in application: 9th October, 2021 (Saturday)

    Date of Online Entrance exam (Tentative): 17th October, 2021 (Sunday) Centre of Entrance Examination: Hyderabad

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: ME Mechatronics
    Course Description: Master of Engineering Mechatronics 1st Batch
    Opening Date: 20 Sep 2021
    Closing Date: 09 Oct 2021
    Category: Engineering


    Eligibility:

    B.E. / B. Tech in Mechanical/ECE/EEE/EIE/Mechat ronics /Automobile /Aeronautical Engineering or equivalent. Minimum of 55% of marks in the qualifying examination.   

    Age Limit: 45 Years


    How to apply:

    Mode of Application:

    Application form can be downloaded from our website under the link “M.E. Admission Notification-2021” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost Rs. 800/- for General and Rs. 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

    PWD candidates are fully exempted from paying the application cost.

    Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2021”


    Comments:

    Availability of applications: 6th September, 2021 (Monday)

    Last date for receipt of filled-in application: 9th October, 2021 (Saturday)

    Date of Online Entrance exam (Tentative): 17th October, 2021 (Sunday) Centre of Entrance Examination: Hyderabad

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Diploma in Tool Die and Mould Making DTDM
    Course Description: Diploma in Tool, Die and Mould Making (DTDM)
    Opening Date: 15 Jun 2021
    Closing Date: 28 Jun 2021
    Category: Miscellaneous Courses


    Eligibility:

    10th Pass with 50% for general & 45% for SC / ST.

    Age Limit:

    Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.


    How to apply:

    Mode of Application:

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at College Website (detailed steps of online payment can be found from prospectus.)

    Centre for Entrance Examination: Hyderabad

    Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2021”


    Comments:

    Availability of applications: 25th February, 2021 (Thursday)

    Last date for receipt of filled-in application: 28th June, 2021 (Monday)

    Date of Entrance exam (Tentative): 11th July, 2021 (Sunday)

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Diploma in Automation and Robotics Engineering DARE
    Course Description: Diploma in Automation and Robotics Engineering (DARE)
    Opening Date: 15 Jun 2021
    Closing Date: 28 Jun 2021
    Category: Miscellaneous Courses


    Eligibility:

    10th Pass

    Age Limit:

    Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.


    How to apply:

    Mode of Application

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at College Website (detailed steps of online payment can be found from prospectus.)

    Centre for Entrance Examination: Hyderabad

    Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2021”


    Comments:

    Availability of applications: 25th February, 2021 (Thursday)

    Last date for receipt of filled-in application: 28th June, 2021 (Monday)

    Date of Entrance exam (Tentative): 11th July, 2021 (Sunday)

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Diploma in Electronics and Communication Engineering DECE
    Course Description: Diploma in Electronics and Communication Engineering (DECE)
    Opening Date: 15 Jun 2021
    Closing Date: 28 Jun 2021
    Category: Engineering


    Eligibility:

    10th Pass

    Age Limit:

    Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.


    How to apply:

    Mode of Application

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at College Website (detailed steps of online payment can be found from prospectus.)

    Centre for Entrance Examination: Hyderabad

    Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2021”


    Comments:

    Availability of applications: 25th February, 2021 (Thursday)

    Last date for receipt of filled-in application: 28th June, 2021 (Monday)

    Date of Entrance exam (Tentative): 11th July, 2021 (Sunday)

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Diploma in Production Engineering DPE
    Course Description: Diploma in Production Engineering (DPE)
    Opening Date: 15 Jun 2021
    Closing Date: 28 Jun 2021
    Category: Engineering


    Eligibility:

    10th Pass

    Age Limit:

    Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.


    How to apply:

    Mode of Application

    By Speed Post or Courier - Filled in application forms can be sent to The Principal Director, CITD, Balanagar, Hyderabad-500 037 along with necessary documents, photograph & application fee.

    By Hand at CITD – Filled in application forms can be deposited at CITD Admissions Desk along with necessary documents, photograph & application fee on any working day from 10:00 a.m. to 05:00 p.m.

    Mode of Payment of Application Fee

    “Application cost Rs. 700/- for General Category and Rs. 350/- for SC/ST Category”

    ·          By way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    ·          By Online at College Website (detailed steps of online payment can be found from prospectus.)

    Centre for Entrance Examination: Hyderabad

    Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2021”


    Comments:

    Availability of applications: 25th February, 2021 (Thursday)

    Last date for receipt of filled-in application: 28th June, 2021 (Monday)

    Date of Entrance exam (Tentative): 11th July, 2021 (Sunday)

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Post Diploma in Tool Design PDTD
    Course Description: Post Diploma in Tool Design (PDTD)
    Opening Date: 18 Sep 2020
    Closing Date: 19 Sep 2020
    Category: Engineering


    Eligibility:

    Age: 27 years. Relaxation up to 5 years for SC/ST candidates.
    Mode of Selection: Through Entrance Examination
    Eligibility for Admission: Diploma in Mechanical Engineering or Equivalent.


    How to apply:

    MODE OF APPLICATION

    Application form can be downloaded from our website www.citdindia.org under the link Post Diploma in Tool Design Admissions-2020 and the filled in application form along with prescribed fee of ?700/- for general and ?350/- for SC/ST category candidates should be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500037, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad

    Or

    By Online at Website by selecting PAY ONLINE.

    Further details can be obtained from Long Term Training Department, Diploma Block, Central Institute of Tool Design, Narsapur X Road, Balanagar, Hyderabad-500037, on any working day between 9:30 a.m. and 5:00 p.m. (Weekly Holiday-Sunday).


    Comments:

    Availability of applications: 17th August, 2020 (Monday)
    Last date for receipt of filled-in application: 19th September, 2020 (Saturday)
    Date of Entrance Exam (Tentative): 26th September, 2020 (Saturday)
    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: MTech Mechatronics
    Course Description: Master of Technology (MTech) Mechatronics
    Opening Date: 20 Jul 2018
    Closing Date: 21 Jul 2018
    Category: Engineering


    Eligibility:

    B.E. / B. Tech. in Mechanical/ ECE/EEE/EIE/Mechatronics/Automobile/Aeron autical Engineering or equivalent. Minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE.
    Age Limit: 45 years (Except Sponsored Candidates)
    Course Fee: Rs. 41,000/- per semester, Industrial Sponsored – Rs.51,000 per semester


    How to apply:

    Application form can be downloaded from our website www.citdindia.org (From 25th June 2018) and the filled in application forms can be sent to 
    The Director (Training), 
    Central Institute of Tool Design, 
    Balanagar, Hyderabad-500 037 
    Along with prescribed application cost. The envelope should be super scribed with “Application for “M.Tech Mechatronics”. Candidates are advised to refer the prospectus for details available at our website. 
    Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or by Online Rs.800/- for general and Rs 400/- for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

    Centre of Examination: JNTUH, College of Engineering, Kukatpally, Hyderabad

    Comments:

    Last date for submission of Application by 5.00 PM: 21st July, 2018 (Saturday)
    Last date for submission of Applications with late fee of Rs. 500/-: 28th July 2018 (Saturday)
    Date of Examination: 5th August, 2018 (Sunday)
    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Post Diploma in Tool Design and CAD CAM PDTDCADCAM
    Course Description: Post Diploma in Tool Design and CAD/CAM (PDTDCAD/CAM)
    Opening Date: 16 Jul 2018
    Closing Date: 26 Jul 2018
    Category: Miscellaneous Courses


    Eligibility:

    Diploma in Mechanical Engineering,Tool,Die and Mould Making or Equivalent)
    Age Limit: 27 years


    How to apply:

    Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to 
    The Director (Training), 
    Central Institute of Tool Design, 
    Balanagar, Hyderabad-500 037
    Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.
    Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.


    Comments:

    Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)
    Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)
    Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.
    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: PG Diploma in Embedded Systems PGDES
    Course Description: Post Graduate Diploma in Embedded Systems (PGDES)
    Opening Date: 16 Jul 2018
    Closing Date: 26 Jul 2018
    Category: Miscellaneous Courses


    Eligibility:

    Bachelor of Engineering/Bachelor of Technology in Electronics and Communication/Electrical and Electronics/Instrumentation or Equivalent
    Age Limit: 45 years


    How to apply:

    Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to 
    The Director (Training), 
    Central Institute of Tool Design, 
    Balanagar, Hyderabad-500 037
    Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.
    Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.


    Comments:

    Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)
    Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)
    Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.
    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Advance Certificate Course in CNC Machining
    Course Description: Advance Certificate Course in CNC Machining
    Opening Date: 13 Jan 2018
    Closing Date: NA
    Category: Miscellaneous Courses


    Eligibility:

    I.T.I. (Machinist, Turner, Bench Fitter, Tool and Die Maker of Equipment


    How to apply:

    1. Education Loan Facility available, in State Bank of India for the above programs, however Terms & Conditions of bank are applicable.


    2. For SC, ST Candidates fee waiver will be provided as per Govt. of India Norms, Reg. Fee Rs. 1000/- to be paid.


    3. Placement Assistance will be provided through CITD’s placement cell


    4. The above mentioned courses will be commenced on 1st and 03rd Wednesday of every month.


    5. Limited hostel facility is available on chargeable basis.


    6. For admission, the candidates have to submit the necessary documents.


    7. For further information visit our website www.citdindia.org


    Comments:

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Certificte Course in In CNC Milling
    Course Description: Certificte Course in In CNC Milling
    Opening Date: 13 Jan 2018
    Closing Date: NA
    Category: Miscellaneous Courses


    Eligibility:

    SSC Passed Or its Equivalent, Minimum Age 15 Years


    How to apply:

    1. Education Loan Facility available, in State Bank of India for the above programs, however Terms & Conditions of bank are applicable.


    2. For SC, ST Candidates fee waiver will be provided as per Govt. of India Norms, Reg. Fee Rs. 1000/- to be paid.


    3. Placement Assistance will be provided through CITD’s placement cell


    4. The above mentioned courses will be commenced on 1st and 03rd Wednesday of every month.


    5. Limited hostel facility is available on chargeable basis.


    6. For admission, the candidates have to submit the necessary documents.


    7. For further information visit our website www.citdindia.org


    Comments:

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Post Graduation in Tool Die Mould Design PGTD
    Course Description: Post Graduation in Tool, Die & Mould Design (PGTD)
    Opening Date: 23 Nov 2016
    Closing Date: 01 Jan 1900
    Category: Miscellaneous Courses


    Eligibility:

    Qualification: BE, BTech (Mech, Prodn) or equivalent.

    Age limit: 45 years


    How to apply:

    Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

    Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

    Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.


    Comments:

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

  • Course Name: Master of Technology MTech - Robotics Automation
    Course Description: Master of Technology (MTech) - Robotics & Automation in collaboration with JNTUH, Hyderabad
    Opening Date: 26 Aug 2014
    Closing Date: 09 Sep 2014
    Category: Engineering


    Eligibility:

    Qualification: B.E /B.Tech (Electronics and Communication/Mechanical Engineering/ Electrical and Electronics/ Electronics and Instrumentation/Aeronautical/Automobile Engg (OR) Equivalent) with 55% marks.


    How to apply:

    Application form and prospectus can be obtained from Training Department, MSME-Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad-500037, on any working day between 09.30 am & 05.00 pm (Weekly holiday on Sunday) by paying application cost prescribed by cash or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad

    Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad

    Candidates who wish to consider their application under sponsored category should submit the Xerox copies of sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the CITD entrance examination subject to fulfilling the other criteria applicable to the category Reservation for SC/ST/PWD quota exists as per Govt. of India norms

    For further details, please contact: Training Department Tel Phone No. 23771959, 23776156, Fax No. 040-23772658, Visit us at: www.citdindia.org, Email: citdplacements@citdindia.org


    Comments:

    Last date for Submission form: 09th September, 2014

    Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot 

  • Course Name: Master Certificate in CAD/CAM (M CAD / CAM)
    Course Description: Master Certificate in CAD/CAM (M CAD / CAM)
    Opening Date: NA
    Closing Date: 01 Jan 1900
    Category: Miscellaneous Courses


    Eligibility:

    Degree/Diploma in Mechanical Engineering or Equivalent.

    Course Fee: Rs. 40,000/-'for SSI & Individuals, Rs. 53,500/- for Govt. Org. & Major Industries. Fee can be paid in 3 installments.


    How to apply:

    Information for the above courses is also available at Vijayawada Sub centre and Extension centre Chennai

    1.      Address: 54-2-9, Phase III, Autonagar, .Vijayawada - 520 007, Ph. No. 0866-2540560.

    2.      Address: MSME-Dl, Annexe Building, 65/1, G.S.T.Road, Guindy, Chennai-600032. Phone.044-22500366.

    Please Address

    MSME-TOOL ROOM, HYDERABAD CENTRAL INSTITUTE OF TOOL DESIGN

    (Ministry of MSME - A Govt, of India Society)

    Balanugar Hyderabad 500037

    Phone no. 23772749, 23776178, 23772747-Extn.213, Fax: 23772658

    Mobile: - +91 9849443056, +91 9440963987

    E-mail citdcadcam@citdindia.org Website, www.citdindia.orq


    Comments:

    To know more information about CITD Hyderabad Admission please visit www.citdindia.org

    Please click the following link for other valuable news available on our Blog: - India Admission Alert Blog  ~~!!~~ Career Counseling Blog ~~!!~~ Admission News Blog ~~!!~~ My Admission News Blog

     

  • Course Name: Diploma in Tool Engineering (DTE Evening)
    Course Description: Diploma in Tool Engineering (DTE Evening)
    Opening Date: NA
    Closing Date: 15 Dec 2009
    Category: Engineering


    Eligibility:

    A pass in two years ITI Course with fitter/Machinist/Tool & Die Maker/Turner/Mechanical Draughtsman trade or a pass in Two years intermediate with MPC group & with minimum 3 years full time practical experience in Mechanical Engg. Industry.

    Course Fee: Rs.12, 600/- per year Self-Sponsored & Rs.19, 000/- per year Industry sponsored the fee includes charges for AutoCAD training.

    No. of seats: 50 seats (Self Sponsored) & 10 seats (Industry sponsored)


    How to apply:

    (a) Application form and prospectus can be obtained form training department, Central Institute of Tool Design, Hyderabad-37. on any working day between 9.30am to 5pm. on payment Rs. 300/- only (for SC/ST candidates Rs.150/-for PWD fully exempted) by Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised Bank.

    (b) Application form can also be downloaded form our website www.citdindia.org and filled in application form can be sent to the Director(Trg.), CITD, Balanagar Hyderabad-37 along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalised

    Bank.

     

    à      Click here to download the application form


    Comments:

    Last date for submission of applications: 15th December 2009 

    To know more Information about this course click here

  • Course Name: Advanced Tool Makers Course (ATM)
    Course Description: Advanced Tool Makers Course (ATM)
    Opening Date: NA
    Closing Date: 23 Jun 2008
    Category: Miscellaneous Courses


    Eligibility:

    SSC/Matric with ITI in any one of the trades-Tool and Die Maker/Fitter/Machinist/Turner

     

    Mode of Selection:

    ±       Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course.

     

    ±       Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category.

     

    ±       For ATM course, the candidates will be selected based on merit in the qualifying Examination i.e. X class & ITI with weight age in the ratio of 50:50 respectively For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed) Tentative Date Of Examination: 06.07.08 (Sunday) at Hyderabad.

     

    Age: 25 years (not born before 31.08.1983)


    How to apply:

    1.      Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

     

    2.      Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

     

    3.      Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

     

    Note:

    ±       Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.

     

    ±       Reservation for SC/ST/PWD category exists in self sponsored category.

     

    ±       Age relaxation upto 5 years for SC/ST candidates.

     

    ±       The Institute is not responsible for any postal delay.

     

    ±       The seats advertised are provisional and the Institute reserves the right to increase or

    Decrease the number of seats.

     

    ±       The rules made by the Institute regarding selection and closure of the admissions shall be

    Final and the Institute reserves the right to alter, vary, change and / or modify the rules

    governing the admissions.

     

    ±       Candidates are advised to refer the prospectus for further details.

     

    To more Information Click here


    Comments:

    Last date for submission of filled–in applications (upto 5.00 pm at CITD): 23.06.08

    Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08

     

    Course Fee: - Rs.12, 000/- per year

     

                To more Information about this course Click here

  • Course Name: Advanced Machinist Course (AMC)
    Course Description: Advanced Machinist Course (AMC)
    Opening Date: NA
    Closing Date: 23 Jun 2008
    Category: Miscellaneous Courses


    Eligibility:

    SSC (10th Class) or equivalent examination appeared but failed with Maths and Science as subjects.

     

    Mode of selection: - Selection on the basis of marks obtained in Maths and Science subjects

    In the qualifying examination that is 10th class failed.

     

    Age: 15 – 24 years (not born before 31.8.1984).


    How to apply:

    1.      Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

     

    2.      Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

     

    3.      Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.

     

    Note:

    ±       Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.

     

    ±       Reservation for SC/ST/PWD category exists in self sponsored category.

     

    ±       Age relaxation upto 5 years for SC/ST candidates.

     

    ±       The Institute is not responsible for any postal delay.

     

    ±       The seats advertised are provisional and the Institute reserves the right to increase or

    Decrease the number of seats.

     

    ±       The rules made by the Institute regarding selection and closure of the admissions shall be

    Final and the Institute reserves the right to alter, vary, change and / or modify the rules

    governing the admissions.

     

    ±       Candidates are advised to refer the prospectus for further details.

     

    To more Information Click here

     


    Comments:

    Last date for submission of filled–in applications (upto 5.00 pm at CITD): 23.06.08

    Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08  

     

    Course Fee: - Rs.6, 000/- per semester

     

                To more Information about this course Click here

Admission News LogoAdmission News

India's one stop shop for latest information on admissions, colleges, universities, study material, exam preparation and guidance.

Menu
  • Home
  • About Us
  • Courses
  • News
  • Contact
Useful Links
  • Terms & Conditions
  • Disclaimer
  • Privacy Policy
  • Site Map
Contact
  • +91 7838001392
  • admissionnews@gmail.com
Copyright © 2022 All rights reserved