The government of India in its endeavor to provide right stimulus for the growth of industry in the country – particularly with a objective of helping MSME’s has established Indo German Tool Room, Aurangabad.
A project of Government on
The Organization implements its programme of technical training through its
Degree in Engg. (Mech./Prod.)
Registration fee: 18000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Diploma in Engg. (Mech./Prod.)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Degree in Engg. (Mech./Prod.)
Registration fee: 18000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Diploma in Engg. (Mech./Prod.)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 6th January, 2020
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Diploma in Engg. (Mech./Prod.)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 6th January, 2020
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)
Registration fee: 18000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
10th Standard with Science and Maths or Equivalent with 60% marks in aggregate of all subjects (50% for the candidates belonging to SC/ST category)
Age: 15-19 years as on 1/7/2021 (3 years relaxation for SC/ST candidates)
Candidate willing to register for any of the course mentioned above will have to register his / her candidature through the Online Registration process through the link available on the website. The application in the prescribed proforma should be filled online. The candidate has to make the payment for registration for admission to the courses through the link provided in the Registration Process. The Registration Fee of Rs.800/- (Rs.400/- in case of SC/ST candidates) plus applicable taxes is to be paid by individual candidate for a single course. Candidates are given choice to register for multiple courses. Candidates willing to register for more than one course will have to make additional payment for each course as applicable. Registration Fee is non-refundable. Candidates candidature for the admission to any of the above courses will be considered after successful submission of online registration.
Note: The above schedule / procedure for selection may change subject to COVID19 situations & directives from appropriate competent authorities.
GENERAL CONDITIONS: (1) Incomplete registrations are liable to be rejected. Interim enquiries will not be entertained. (2) Candidates belonging to the reserved categories should substantiate their claim by enclosing a Caste Certificate issued by competent authority. In case of OBC category, candidate must produce the certificate from competent authority certifying that he/she does not belong to creamy layer. Candidates belonging to the EWS categories should substantiate their claim by enclosing a EWS Certificate issued by competent authority In case of PAPs (Project Affected Persons) certificate to be produced from Regional Officer of M.I.D.C. Caste certificate if required will be verified from issuing authority. (3) The numbers of seats advertised are provisional and the Tool Room reserves the rights to alter the number of seats. (4) Tool Room is not responsible for any technical problems occurred during the Registration Process. (5) The rules made by the Tool Room regarding the selection and the closure of admissions shall be final and binding. Candidates are advised to refer the prospectus for further details. (6) Hostel facility available for boys and girls separately & will be given on availability. (7) For any help, forward your enquiries on entranceexam@igtraur.org.
Commencement of Online Registration: 26th July, 2021
Last Date of Online Registration: 15th August, 2021
Declaration of the Merit List: 20th August, 2021
Admission / Counselling Schedule: 23rd August, 2021 onwards
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
10th Standard with Science and Maths or Equivalent with 60% marks in aggregate of all subjects (50% for the candidates belonging to SC/ST category)
Age: 15-19 years as on 1/7/2021 (3 years relaxation for SC/ST candidates)
Candidate willing to register for any of the course mentioned above will have to register his / her candidature through the Online Registration process through the link available on the website. The application in the prescribed proforma should be filled online. The candidate has to make the payment for registration for admission to the courses through the link provided in the Registration Process. The Registration Fee of Rs.800/- (Rs.400/- in case of SC/ST candidates) plus applicable taxes is to be paid by individual candidate for a single course. Candidates are given choice to register for multiple courses. Candidates willing to register for more than one course will have to make additional payment for each course as applicable. Registration Fee is non-refundable. Candidates candidature for the admission to any of the above courses will be considered after successful submission of online registration.
Note: The above schedule / procedure for selection may change subject to COVID19 situations & directives from appropriate competent authorities.
GENERAL CONDITIONS: (1) Incomplete registrations are liable to be rejected. Interim enquiries will not be entertained. (2) Candidates belonging to the reserved categories should substantiate their claim by enclosing a Caste Certificate issued by competent authority. In case of OBC category, candidate must produce the certificate from competent authority certifying that he/she does not belong to creamy layer. Candidates belonging to the EWS categories should substantiate their claim by enclosing a EWS Certificate issued by competent authority In case of PAPs (Project Affected Persons) certificate to be produced from Regional Officer of M.I.D.C. Caste certificate if required will be verified from issuing authority. (3) The numbers of seats advertised are provisional and the Tool Room reserves the rights to alter the number of seats. (4) Tool Room is not responsible for any technical problems occurred during the Registration Process. (5) The rules made by the Tool Room regarding the selection and the closure of admissions shall be final and binding. Candidates are advised to refer the prospectus for further details. (6) Hostel facility available for boys and girls separately & will be given on availability. (7) For any help, forward your enquiries on entranceexam@igtraur.org.
Commencement of Online Registration: 26th July, 2021
Last Date of Online Registration: 15th August, 2021
Declaration of the Merit List: 20th August, 2021
Admission / Counselling Schedule: 23rd August, 2021 onwards
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
10th Standard with Science and Maths or Equivalent with 60% marks in aggregate of all subjects (50% for the candidates belonging to SC/ST category)
Age: 15-19 years as on 1/7/2021 (3 years relaxation for SC/ST candidates)
Candidate willing to register for any of the course mentioned above will have to register his / her candidature through the Online Registration process through the link available on the website. The application in the prescribed proforma should be filled online. The candidate has to make the payment for registration for admission to the courses through the link provided in the Registration Process. The Registration Fee of Rs.800/- (Rs.400/- in case of SC/ST candidates) plus applicable taxes is to be paid by individual candidate for a single course. Candidates are given choice to register for multiple courses. Candidates willing to register for more than one course will have to make additional payment for each course as applicable. Registration Fee is non-refundable. Candidates candidature for the admission to any of the above courses will be considered after successful submission of online registration.
Note: The above schedule / procedure for selection may change subject to COVID19 situations & directives from appropriate competent authorities.
GENERAL CONDITIONS: (1) Incomplete registrations are liable to be rejected. Interim enquiries will not be entertained. (2) Candidates belonging to the reserved categories should substantiate their claim by enclosing a Caste Certificate issued by competent authority. In case of OBC category, candidate must produce the certificate from competent authority certifying that he/she does not belong to creamy layer. Candidates belonging to the EWS categories should substantiate their claim by enclosing a EWS Certificate issued by competent authority In case of PAPs (Project Affected Persons) certificate to be produced from Regional Officer of M.I.D.C. Caste certificate if required will be verified from issuing authority. (3) The numbers of seats advertised are provisional and the Tool Room reserves the rights to alter the number of seats. (4) Tool Room is not responsible for any technical problems occurred during the Registration Process. (5) The rules made by the Tool Room regarding the selection and the closure of admissions shall be final and binding. Candidates are advised to refer the prospectus for further details. (6) Hostel facility available for boys and girls separately & will be given on availability. (7) For any help, forward your enquiries on entranceexam@igtraur.org.
Commencement of Online Registration: 26th July, 2021
Last Date of Online Registration: 15th August, 2021
Declaration of the Merit List: 20th August, 2021
Admission / Counselling Schedule: 23rd August, 2021 onwards
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 6th January, 2020
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Diploma in Engg. (Mech./Prod.)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 6th January, 2020
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 6th January, 2020
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)
Registration fee: 18000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 6th January, 2020
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
I.T.I (Draughtsman Mech./Machinist/Turner/Bench Filtter/Tool and Die Maker)
Registration fee: 12000/-
Security Deposit: Rs. 5000/-
· Registrations for the above courses are under progress
· 22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.
Contact for Further details:
· Log on to the website for course details
· Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org
· Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in
· Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.
· Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org
Commencement of the courses on: 7th October, 2019
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot