National Institute of Technical Teachers Training and Research, NITTTR, Chandigarh
- About National Institute of Technical Teachers Training and Research:
In realization of the need for training better quality technicians to meet the large scale industrialization of the country, the ministry of Human Resource Development (the then Ministry of Education), Government of India established four Regional Technical Teachers' Training Institutes (now National Institute of Technical Teachers Training & Research, NITTTR at Bhopal, Chandigarh, Chennai and Kolkata in 1967. The Institute at
The institute started with long term teachers' training programmes for polytechnic teachers in 1967 and was also entrusted with the responsibility of promoting curriculum development work for the states in the region. To improve the competence of teachers for implementing new curricula designed by this institute, short term courses have been offered since 1967. The institute established a Media Centre in 1981 for preparing print & non-print instructional materials.
The institute also set up the department of Rural Development and the department of Entrepreneurship Development to assist polytechnics in directing their efforts towards training manpower and disseminating information in these areas. The Educational Television and Computer Science departments were established in the year 1981and 1982 respectively. Since 1983, the institute has been guiding and assisting the states in the areas of Educational Planning and Management. Since 1992, the institute started offering Regular Master of Engineering Programmes in (i) Engineering Education and (ii) Manufacturing Technology. In the year 1994, two more courses namely Master of Engineering in Construction Technology and Management and Computer Science and Engineering were added. In the year 1998, two more Master of Engineering Programmes in Instrumentation and Control and Electronics and Communication Engineering were added, and, since 2005, the institute started offering Modular Master of Engineering Programmes in all the above disciplines. All these programmes, being offered for teachers of technical institutions and their administrators, professionals from industry and general candidates, are duly approved by AICTE and affiliated to
Since June 2001, this institute has been conducting short term courses in various subjects for faculty of Engineering Colleges in addition to organizing AICTE sponsored Induction Training Programmes.
To know more about National Institute of Technical Teachers Training and Research, please contact us by clicking below
Contact Us - List of available courses
- Course Name: PhD Degree Programme
Course Description: Ph.D. Degree Programme
Opening Date: 01 Apr 2021
Closing Date: 30 Apr 2021
Category: Miscellaneous Courses
Eligibility:1. Only permanent faculty members of AICTE recognized polytechnics (Govt./ Govt.-aided/ Selffinancing) fulfilling the following requirements are eligible to apply.
(b) Doctoral Programme:
(i) Minimum teaching experience of 3 years as on 30th March, 2021.
(ii) Master’s Degree or equivalent (minimum qualification) in the appropriate branch and other eligibility criteria prescribed by the individual institution.
2. A candidate selected for admission under QIP will have to execute an undertaking to serve his/her parent institution for a minimum period of two years (for M.Tech./ ME) and three years (for Ph.D.) after the completion of the programme.
3. Computer Programmers, System Programmers, Workshop Staff, Guest Lecturer, Visiting Lecturer, Teaching Assistants, Ad-hoc Appointees, Technical Assistants and other such categories of staff are not eligible.
How to apply:Steps for applying for PhD admission under QIP (Poly.) Scheme 2021-22
The interested candidates are advised to follow the steps as listed below to apply for the admission:
1. Read the information brochure carefully before filling in the application form. [Information Brochure available on the website]
2. Pay the application fee of Rs 1000/- (Rs. 500/- in case of SC/ST candidates) before starting the admission form filling process. The fee can be paid in the form of demand draft in favour of Director, NITTTR, Chandigarh payable at Chandigarh. Also the fee can be paid through NEFT/RTGS using the following bank details:
· Name of the Bank: Punjab National Bank
· Name of the Account Holder: Director, NITTTR, Chandigarh
· Account Type: Savings
· Account Number: 06182191012841
· Bank Branch IFSC Code: PUNB0061810
3. Note the application fee payment details i.e. DD/UTR/Ref No., Date, Bank Name, and Amount Paid.
4. Download the doc file of the application form and fill in all the details correctly. Save the filled application form in PDF format. [Form in doc and pdf format available on the website]
5. Click on the following link to fill the online Google form. [Online Form link available on the website]
6. Take print out of the PDF format of filled application form (saved as per step 4 above) and put your signature at the specified place.
7. Get the application form certified/forwarded by the Principal or Head of the Institution
8. Send its print out (three copies are required to be sent), duly forwarded by the Principal/ Head of the Institution, as instructed, along with all relevant enclosures and the payment receipt to Prof. S.S. Pattnaik, Principal Coordinator – QIP (Poly) and Director, National Institute of Technical Teachers Training & Research, Sector – 26, Chandigarh – 160 019 latest by May 10, 2021.
Contact us
For any query related to QIP (Poly) Contact the QIP Coordinators at the following details:
· Dr Srinivasa KG, Phone: 0172-2759695, Mobile: 97316-96526,email to: kgsrinivasa@nitttrchd.ac.in
· Dr Balwinder S. Dhaliwal, Phone: 0172-2759796, Mobile: 98148-34209, email to: academiccell@nitttrchd.ac.in, qip_poly@nitttrchd.ac.in
The application fee of Rs 1000/- (Rs. 500/- for SC/ST) is applicable
Comments:Starting date for submission of on-line applications: 28th March, 2021
Closing date for submission of on-line applications: 30th April, 2021
Last date of receipt of hard copies of duly forwarded applications along with relevant enclosures: 10th May, 2021
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot - Course Name: ME Degree Programme
Course Description: ME Degree Programme
Opening Date: 01 Apr 2021
Closing Date: 30 Apr 2021
Category: Engineering
Eligibility:1. Only permanent faculty members of AICTE recognized polytechnics (Govt./ Govt.-aided/ Selffinancing) fulfilling the following requirements are eligible to apply.
(a) Master’s Programme:
(i) Minimum teaching experience of 2 years as on 30th March, 2021.
(ii) Bachelor’s degree or equivalent (minimum qualification) in the appropriate branch and other eligibility criteria prescribed by the individual institution.
2. A candidate selected for admission under QIP will have to execute an undertaking to serve his/her parent institution for a minimum period of two years (for M.Tech./ ME) and three years (for Ph.D.) after the completion of the programme.
3. Computer Programmers, System Programmers, Workshop Staff, Guest Lecturer, Visiting Lecturer, Teaching Assistants, Ad-hoc Appointees, Technical Assistants and other such categories of staff are not eligible.
How to apply:Steps for applying for PhD admission under QIP (Poly.) Scheme 2021-22
The interested candidates are advised to follow the steps as listed below to apply for the admission:
1. Read the information brochure carefully before filling in the application form. [Information Brochure available on the website]
2. Pay the application fee of Rs 1000/- (Rs. 500/- in case of SC/ST candidates) before starting the admission form filling process. The fee can be paid in the form of demand draft in favour of Director, NITTTR, Chandigarh payable at Chandigarh. Also the fee can be paid through NEFT/RTGS using the following bank details:
· Name of the Bank: Punjab National Bank
· Name of the Account Holder: Director, NITTTR, Chandigarh
· Account Type: Savings
· Account Number: 06182191012841
· Bank Branch IFSC Code: PUNB0061810
3. Note the application fee payment details i.e. DD/UTR/Ref No., Date, Bank Name, and Amount Paid.
4. Download the doc file of the application form and fill in all the details correctly. Save the filled application form in PDF format. [Form in doc and pdf format available on the website]
5. Click on the following link to fill the online Google form. [Online Form link available on the website]
6. Take print out of the PDF format of filled application form (saved as per step 4 above) and put your signature at the specified place.
7. Get the application form certified/forwarded by the Principal or Head of the Institution
8. Send its print out (three copies are required to be sent), duly forwarded by the Principal/ Head of the Institution, as instructed, along with all relevant enclosures and the payment receipt to Prof. S.S. Pattnaik, Principal Coordinator – QIP (Poly) and Director, National Institute of Technical Teachers Training & Research, Sector – 26, Chandigarh – 160 019 latest by May 10, 2021.
Contact us
For any query related to QIP (Poly) Contact the QIP Coordinators at the following details:
· Dr Srinivasa KG, Phone: 0172-2759695, Mobile: 97316-96526,email to: kgsrinivasa@nitttrchd.ac.in
· Dr Balwinder S. Dhaliwal, Phone: 0172-2759796, Mobile: 98148-34209, email to: academiccell@nitttrchd.ac.in, qip_poly@nitttrchd.ac.in
The application fee of Rs 1000/- (Rs. 500/- for SC/ST) is applicable
Comments:Starting date for submission of on-line applications: 28th March, 2021
Closing date for submission of on-line applications: 30th April, 2021
Last date of receipt of hard copies of duly forwarded applications along with relevant enclosures: 10th May, 2021
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot - Course Name: PhD
Course Description: PhD [Branch/Discipline: ME (Manufacturing Technology), CE (Construction Technology & Management), CSE, EE (Instrumentation & Control), ECE, Engineering Education, Management, Rural Development, Environmental Sciences, Himalayan Studies, Climate Change, Disaster Management, Entrepreneurship and Small Enterprise Management, Management of Disabilities and Sustainable Development] {Course offered by Panjab University, Chandigarh}
Opening Date: 20 Jul 2018
Closing Date: NA
Category: Miscellaneous Courses
Eligibility:Master’s degree in Engineering Education or Engineering/Technology/Management or equivalent in a relevant discipline with minimum 60% marks in aggregate or with a minimum CGPA of 6.75 on a 10 point scale.Qualified the Ph.D. Entrance Examination by the concerned university (exemption from appearance in the entrance examination shall be as per the Ph.D. ordinance of the concerned university).Basis of Selection:Presentation and interview: Academic/Research Degree Committee of the institute/ university will assess the eligibility of the candidates.NOTES:1. Candidates should first appear in the Entrance Test either by Punjab University, Chandigarh OR IKGPunjab Technical University, Jalandhar or Himachal Pradesh University (Institute of Integrated Himalayan Studies) before applying to the institute.2. Candidates should apply for admission on the prescribed form which is enclosed with Ph.D. Brochure, duly filled in their own handwriting along with qualifying certificate of Ph.D. Entrance Test.3. Sponsorship letter should include an undertaking stating that the period of study will be treated as ‘on duty’ with usual salary, and he/she will be relieved for the period of studies, and, all fees will be paid by the candidate/organization as per institute rules.4. Full Time candidates as well as Part-time candidates (check rules and regulations of concerned university in respect of Part-time candidates) are required to submit a “No Objection Certificate” at the time of interview from their employers stating that the candidate is permitted to pursue studies on a Full Time / Part-time basis and that· his/her official duties permit him/her to devote sufficient time for research.· he/she will be fully relieved from duty and permitted to reside at the Institute for a period as per university requirement during his/her registration for the degree.5. The relevancy/equivalency of M.Tech/ME degree for admission to a given discipline will be defined/determined by the concerned RDC of the university.6. Admission is subject to vacancy with each supervisor/guide (not more than six) being available in the relevant specializations.7. Candidates must be medically fit and must bring alongwith them a medical fitness certificate signed by Gazetted Medical Officer at the time of admission.8. The application form along with attested copies of certificates must be submitted to the Dean, Academics & International Affairs, Academic Cell. The interview for the admission will be held by the Ph.D. Academic/Research Degree Committee of the institute in the office of the Director.9. In case a student leaves the Institute without completing the Ph.D. programme, he/she will be refunded only the Institute security/caution money. All outstanding dues will, however, be recovered before such refund is made.10. The Institute reserves the right to alter the schedule of admission, fee structure, and financial incentives to candidates if considered, necessary.
How to apply:Candidates are advised to send the Ph.D. Application Form (complete in all respect along with copies of testimonials and demand draft of Rs. 5,000/- to The Director, National Institute of Technical Teachers Training & Research, Sector 26, Chandigarh – 160019
Comments:Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot - Course Name: ME Construction Technology and Management
Course Description: ME (Construction Technology and Management) [Modular Programme]
Opening Date: 03 Apr 2017
Closing Date: 15 May 2017
Category: Engineering
Eligibility:A Bachelor’s Degree in Civil Engineering from a recognized University or its equivalent with atleast 50% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE) in teaching/industry/research organization.
How to apply:Full time sponsored Polytechnic/Engineering College Teachers. Officials of the State Directorates and Boards of Technical Education, NITTTRs, universities (both for Modular and Regular) and working professionals from Industry/Other Organizations (only for Regular) are eligible for admission Full detail about Eligibility, Reservation, Programme Structure etc. can be obtained from Prospectus / institute website: www.nitttrchd.ac.in. Few seats (under Regular only) for Fresh candidates shall be admitted through GET conducted by
PROSPECTUS with application forms can be obtained (may also be downloaded from such applications must accompany a demand draft of Rs. 500/-) from the institute either on payment of Rs. 600/- in cash or by sending a crossed Demand Draft of Rs. 650/- in favour of Director, NITTTR, Chandigarh along with a self addressed envelope of size 25x20 cms. Separate application is to be submitted along with fees for each programme.
Comments:Last date for Submission form: 15th May 2017
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
- Course Name: ME Computer Science and Engineering
Course Description: ME (Computer Science and Engineering) [Modular Programme] Admission 2017
Opening Date: 03 Apr 2017
Closing Date: 15 May 2017
Category: Engineering
Eligibility:A Bachelor’s Degree in Computer Science & Engineering/Electronics Engineering/ Electrical Engineering/ Instrumentation & Control Engineering/Information Technology from a recognized University or its equivalent with atleast 50% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE) in teaching/industry/research organization.
How to apply:Full time sponsored Polytechnic/Engineering College Teachers. Officials of the State Directorates and Boards of Technical Education, NITTTRs, universities (both for Modular and Regular) and working professionals from Industry/Other Organizations (only for Regular) are eligible for admission Full detail about Eligibility, Reservation, Programme Structure etc. can be obtained from Prospectus / institute website: www.nitttrchd.ac.in. Few seats (under Regular only) for Fresh candidates shall be admitted through GET conducted by
PROSPECTUS with application forms can be obtained (may also be downloaded from our website such applications must accompany a demand draft of Rs. 500/-) from the institute either on payment of Rs. 600/- in cash or by sending a crossed Demand Draft of Rs. 650/- in favour of Director, NITTTR, Chandigarh along with a self addressed envelope of size 25x20 cms. Separate application is to be submitted along with fees for each programme.
Comments:Last date for Submission form: 15th May 2017
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
- Course Name: ME Instrumentation and Control
Course Description: ME (Instrumentation and Control) [Regular Programme] Admission 2017
Opening Date: 03 Apr 2017
Closing Date: 28 Jun 2017
Category: Engineering
Eligibility:A Bachelor’s Degree in Electrical Engineering /Electronics Engineering/ Instrumentation and Control Engineering from a recognized University or its equivalent with atleast 50% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE) in teaching/industry/research organization.
How to apply:Full time sponsored Polytechnic/Engineering College Teachers. Officials of the State Directorates and Boards of Technical Education, NITTTRs, universities (both for Modular and Regular) and working professionals from Industry/Other Organizations (only for Regular) are eligible for admission Full detail about Eligibility, Reservation, Programme Structure etc. can be obtained from Prospectus / institute www.nitttrchd.ac.in. Few seats (under Regular only) for Fresh candidates shall be admitted through GET conducted by
PROSPECTUS with application forms can be obtained (may also be downloaded from website such applications must accompany a demand draft of Rs. 500/-) from the institute either on payment of Rs. 600/- in cash or by sending a crossed Demand Draft of Rs. 650/- in favour of Director, NITTTR, Chandigarh along with a self addressed envelope of size 25x20 cms. Separate application is to be submitted along with fees for each programme.
Comments:Last date for Submission form: 28th June, 2017
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
- Course Name: MTech Engineering Education
Course Description: MTech (Engineering Education) Admission 2017
Opening Date: 30 Jan 2017
Closing Date: 01 Jan 1900
Category: Engineering
Eligibility:A Bachelor’s Degree in Engineering/Technology/Pharmacy from a recognized University or its equivalent OR Master’s Degree in Mathematics/Physics/Chemistry from a recognized University with atleast 50% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE) in teaching/industry/research organization.
How to apply:Full time sponsored Polytechnic/Engineering College Teachers. Officials of the State Directorates and Boards of Technical Education, NITTTRs, universities (both for Modular and Regular) and working professionals from Industry/Other Organizations (only for Regular) are eligible for admission Full detail about Eligibility, Reservation, Programme Structure etc. can be obtained from Prospectus / institute website: www.nitttrchd.ac.in. Few seats (under Regular only) for Fresh candidates shall be admitted through GET conducted by
PROSPECTUS with application forms can be obtained (may also be downloaded from our website such applications must accompany a demand draft of Rs. 500/-) from the institute either on payment of Rs. 600/- in cash or by sending a crossed Demand Draft of Rs. 650/- in favour of Director, NITTTR, Chandigarh along with a self addressed envelope of size 25x20 cms. Separate application is to be submitted along with fees for each programme.
Comments:Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
- Course Name: ME Manufacturing Technology
Course Description: ME (Manufacturing Technology) [Regular Programme]
Opening Date: 25 Apr 2015
Closing Date: 24 Jun 2015
Category: Engineering
Eligibility:A Bachelor’s Degree in Manufacturing Technology/Mechanical Engg/Production Engg./Industrial Engg./Automobile Engineering from a recognized University or its equivalent with atleast 50% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE) in teaching/industry/research organization.
How to apply:Full time sponsored Polytechnic/Engineering College Teachers. Officials of the State Directorates and Boards of Technical Education, NITTTRs, universities (both for Modular and Regular) and working professionals from Industry/Other Organizations (only for Regular) are eligible for admission Full detail about Eligibility, Reservation, Programme Structure etc. can be obtained from Prospectus / institute website: www.nitttrchd.ac.in. Few seats (under Regular only) for Fresh candidates shall be admitted through GET conducted by
PROSPECTUS with application forms can be obtained (may also be downloaded from our website; such applications must accompany a demand draft of Rs. 500/-) from the institute either on payment of Rs. 600/- in cash or by sending a crossed Demand Draft of Rs. 650/- in favour of Director, NITTTR, Chandigarh along with a self addressed envelope of size 25x20 cms. Separate application is to be submitted along with fees for each programme.
Comments:Last date for Submission form: 24th June, 2015
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot